Chicago Pneumatic® 10mm (3/8") Quick Change Air Drill

RP9287
10mm (3/8") keyless chuck with direct exhaust from the operator workpiece - very versatile. Good productivity and durability. Suitable for many applications.
No load speed: 2.900rpm.
Chuck capacity: 10mm (3/8").
Maximum torque: 5.3Nm (3.91 ft-lbs).
Noise level: 89dB(A).
Vibration: 2.5m/s2.
Length: 199mm (7.83").
Weight: 1.15kg.

Chicago Pneumatic® Heavy-Duty Air Reciprocating Saw

CP7901
Heavy duty reciprocating saw. Premium tool for all cutting applications.

Specifications:
Sound pressure: 88.3dB(A).
Strokes per minute: 10,000.
Actual air consumption 5.5CFM.
Air inlet: 1/4" NPTF.
Average air consumption 1.4CFM.
Min hose size: 10mm (3/8").
Weight: 0.86kg.
Overall length: 229mm.
Stroke: 10mm (3/8").

Chicago Pneumatic - Air Scribers



Air Scribe

Lightweight and easy to operate. A simple, piston supplied power mechanism for
trouble-free use. Graduated sleeve
throttle permits accurate power
selection. Change of stylus
converts tool to scaler or hammer.
Blows per minute: 13,500
Air consumption: 2.1cfm.
Air inlet thread: 1/4” NPTF.
Noise level: 82dBA.
Vibration: 4.2m/s2.
Length: 127mm.

Chicago Pneumatic® 6mm Mini Die Grinder

CP9106Q-B
High efficient and powerful 0.28hp (210W) motor. Low noise level. Variable top speed regulator. Composite overmould grip. Rear exhaust.

Specifications:
Collet size: 1/4" (6mm).
Free speed: 22000rpm.
Power: 210W 0.28hp.
Length: 120mm (4.7").
Weight: 0.7kg.
Noise level: 80db(A).
Sound power: 91db(A).
Vibration: 2.5 m/s2.
Average air consumption: 4.35cfm.
Actual air consumption: 8.7cfm.
Free speed air consumption: 19.3cfm.
Min. hose size: 3/8".
Air inlet: 1/4" NPTF.

1/2" Ratchet Speed Wrench - CP828H

1/2" Square drive, 10mm bolt capacity. Efficient 1/2 hp motor provides up to 50ft/lbs torque, teasing throttle for speed control, compact, lightweight design, ideal for automotive work, front exhaust, 1/4" NPT air inlet thread for 10mm air hose, 150rpm free speed, 90PSI air pressure, 4CFM* air consumption. Overall length: 254mm



DP2610
Hammer finish casing, 10mm Jacobs chuck, stall resistant, directional front exhaust, needle bearing gears, 1/4 NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4CFM* air consumption, 3/8"- 24 spindle thread. Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

Chicago Pneumatic? Speed Air Ratchet

CP825
New improved ratchet head with a convenient forward/reverse button for one finger directional changes. Square handle design for positive grip. Easy speed control throughout range, maximum rundown speed of 200rpm. Compact/lightweight, ideal for confined working conditions. Applications: under-dashboard work, small engine repair, all small fasteners, etc.

Specifications:
1/4" square drive.
Standard bolt size: 6mm.
Working torque range: 6-20Nm.
Average air consumption: 2.5CFM.
Air inlet: 1/4" NPT.
Min hose size: 6mm.
Overall length: 165mm.
Weight: 0.85kg.

Chicago Pneumatic® Reciprocating Air Saw

The Chicago Pneumatic? CP700 is a mini reciprocating air saw allows you to quickly cut through material with ease. Adjustable guard/guide allows operator to set depth of cut. Ergonomic design for comfort and easy handling and muffler work. Lock off throttle prevents accidental startups.

Includes 18T, 28T, 32T replacement saw blades.
Delivers 10,000 strokes per minute.

CP700 Heavy Duty Reciprocating Air Saw

CP700 Specification:
Strokes per minute: 10,000
Air Comsumption: 5.5CFM (based on a 15 second cycle per minute average use)
Air inlet: 1/4" NPTF; 3/8" minimum hose size

100mm (4") Heavy-Duty Angle Grinder - CP-854

Aluminum alloy housing, spiral bevel gearing, removable dead handle and a powerful 6hp high performance motor. Supplied with auxiliary side handle, lightweight and compact, 1/4" NPT air inlet thread, for 10mm air hose. 90PSI air pressure, 6CFM* air consumption, 3/8"- 24 spindle thread and an overall length of 229mm.

CP854 100mm (4") Angle Grinder

*Based on a 15 second cycle per minute average use.

Compact Pencil Grinder

Compact pencil grinder with good power to size ratio. Ideal for intricate work. Lightweight. Quiet running.

Free speed: 60,000rpm.
Power: 0.04kW (0.054hp).
Air consumption: 3.5l/s (7CFM).
Air inlet: 1/4" NPTF.
Noise level: 71dB.
Vibration: 8.3m/sec2.
Length: 133mm.
Weight: 200g.

100mm (4") Heavy-Duty Angle Grinder - CP-854

Aluminum alloy housing, spiral bevel gearing, removable dead handle and a powerful 6hp high performance motor. Supplied with auxiliary side handle, lightweight and compact, 1/4" NPT air inlet thread, for 10mm air hose. 90PSI air pressure, 6CFM* air consumption, 3/8"- 24 spindle thread and an overall length of 229mm.

CP854E 125mm (5") Angle Grinder

*Based on a 15 second cycle per minute average use.