Chicago Pneumatic - Air Scribers



Air Scribe

Lightweight and easy to operate. A simple, piston supplied power mechanism for
trouble-free use. Graduated sleeve
throttle permits accurate power
selection. Change of stylus
converts tool to scaler or hammer.
Blows per minute: 13,500
Air consumption: 2.1cfm.
Air inlet thread: 1/4” NPTF.
Noise level: 82dBA.
Vibration: 4.2m/s2.
Length: 127mm.

Chicago Pneumatic? Heavy-Duty Pistol Grip Air Hammer

CP7110
Has the power and speed to tackle the toughest jobs in the workshop. Whether its cutting, punching, chipping or scrapping. Touch trigger for precision start ups and total control. Cushioned exhaust deflector on barrel for comfort and reduced vibration.

Specifications:
1/4" air inlet.
Blows per minute: 3,200bpm.
Overall length: 229mm.
Weight 1.7kg.

3/4" Very Heavy Duty Impact Ratchet

CP772H
One hand push button forward/reverse power regulator. Four positive power settings in forward and ultimate power in reverse. Teasing throttle design for precise control. Handle exhaust with 360° air inlet swivel to prevent hose kinks. Comfortable contoured handle grip reduces user fatigue. Hammer mechanism DynaPactTM clutch. Pin clutch oil bath.

Output drive: 3/4”.
Air inlet thread: 3/8” NPT.
Free speed: 4,200rpm.
Air consumption: 6.0cfm.
Air pressure: 90psi.
Standard bolt capacity: 1”.
Working torque range: 150 - 700Nm.
Max. Torque @90psi rev: 1356Nm.
Sound pressure level: 96dBA.
Vibration level: 4.9m/s2.
Overall length: 245mm.
Weight: 4.76kg.



*Based on a 15 second cycle per minute average use.

Chicago Pneumatic? 10mm Reversible Extra Heavy-Duty Air Drill

CP-789-26
Teasing throttle for precise control, handle exhaust, needle bearing gearings. Suitable for screwdriving, honing and heavy drilling.

Free speed: 2,600rpm.
Air inlet thread 1/4” NPT for 10mm hose.
Air consumption: 4cfm*.
Spindle thread: 3/8” - 24f.
Maximum torque: 4.2Nm (3.1ft/lbs).
Noise level: 101dBA.
Overall length: 178mm.
Weight: 1.13kg.

*Based on a 15 second
cycle per minute average use.

Mini Angle Grinder CP875

Compact, lightweight design for easy maneuverability. Lock off throttle to prevent accidental start up. 90 degree angle head allows flexibility in areas of restricted access. Suitable for high speed blending, smoothing, porting and deburring in confine areas. Supplied complete with 1/4 " and 6mm collets.
Free speed: 22,500rpm.
Air pressure: 90psi.
Air consumption: 4cfm.
Collet size: 1/4” and 6mm.
Overall length: 123mm.

Chicago Pneumatic® 6mm Mini Die Grinder

CP9106Q-B
High efficient and powerful 0.28hp (210W) motor. Low noise level. Variable top speed regulator. Composite overmould grip. Rear exhaust.

Specifications:
Collet size: 1/4" (6mm).
Free speed: 22000rpm.
Power: 210W 0.28hp.
Length: 120mm (4.7").
Weight: 0.7kg.
Noise level: 80db(A).
Sound power: 91db(A).
Vibration: 2.5 m/s2.
Average air consumption: 4.35cfm.
Actual air consumption: 8.7cfm.
Free speed air consumption: 19.3cfm.
Min. hose size: 3/8".
Air inlet: 1/4" NPTF.

Chicago Pneumatic® Heavy-Duty Air Reciprocating Saw

CP7901
Heavy duty reciprocating saw. Premium tool for all cutting applications.

Specifications:
Sound pressure: 88.3dB(A).
Strokes per minute: 10,000.
Actual air consumption 5.5CFM.
Air inlet: 1/4" NPTF.
Average air consumption 1.4CFM.
Min hose size: 10mm (3/8").
Weight: 0.86kg.
Overall length: 229mm.
Stroke: 10mm (3/8").

Chicago Pneumatic? Speed Air Ratchet

CP825
New improved ratchet head with a convenient forward/reverse button for one finger directional changes. Square handle design for positive grip. Easy speed control throughout range, maximum rundown speed of 200rpm. Compact/lightweight, ideal for confined working conditions. Applications: under-dashboard work, small engine repair, all small fasteners, etc.

Specifications:
1/4" square drive.
Standard bolt size: 6mm.
Working torque range: 6-20Nm.
Average air consumption: 2.5CFM.
Air inlet: 1/4" NPT.
Min hose size: 6mm.
Overall length: 165mm.
Weight: 0.85kg.

Chicago Pneumatic 10mm Reversible Pistol Drill

CP1664
10mm capacity chuck. Compact and lightweight pistol drill with sliding reverse control. Quick change for forward and can be used for drilling and screwing.

Power: 0.19kW.
Free speed: 2,000rpm.
Chuck capacity: 10mm.
Spindle thread: 3/8” - 24.
Maximum torque: 1.8Nm.
Air consumption: 9.3ltr/s (19.7cfm).
Sound pressure level: 83dBA.
Air inlet: 1/4”.
Overall length: 225mm.
Weight: 0.70kg.

Chicago Pneumatic® Reciprocating Air Saw

The Chicago Pneumatic? CP700 is a mini reciprocating air saw allows you to quickly cut through material with ease. Adjustable guard/guide allows operator to set depth of cut. Ergonomic design for comfort and easy handling and muffler work. Lock off throttle prevents accidental startups.

Includes 18T, 28T, 32T replacement saw blades.
Delivers 10,000 strokes per minute.

CP700 Heavy Duty Reciprocating Air Saw

CP700 Specification:
Strokes per minute: 10,000
Air Comsumption: 5.5CFM (based on a 15 second cycle per minute average use)
Air inlet: 1/4" NPTF; 3/8" minimum hose size