Volt Stick

Used for checking the presence of an AC voltage, locates break in cables, detects blown fuses and distinguishes between live and neutral wires in both single and three phase supply, without making any disconnection in cables, wall sockets etc. Volt Stick has a sensitivity of up to 4mm distance of a 2,5mm conductor carrying 220 - 400V. Note: The Volt Stick is for use on 50Hz supply only.

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

MNT070 3-in-1 Digital Multimeter and Network Maintenance Tester

The 3 in 1 digital multimeter is capable of testing the
following;
- Network cable testing.
- Line testing (RJ11).
- DMM testing.

AC/DC voltage up to 1000V.
AC/DC current up to 10A.
Resistance up to 200MW.
Relative measurement function.
Diode testing facility.
Clear display with LED back light & data hold function.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.

Pack includes:
- Network digital multimeter
- Test probes
- TJ45 jack (remote)
- 9V battery (installed)
- Instruction manual

Product Dimensions: 165(W) x 65(D) x 230(H) mm
618g Gross Weight

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM668 Digital Multimeter

DAM668 Digital Multimeter Features include:
Continuity, diode, transistor hFE, auto ranging, reading/peak hold, bar graph, fused current range, overload indication: low battery indicator, tilt stand/hanger.

Voltage max: 700V AC 1000V DC.
Current max: 10A AC/DC.
Resistance max: 32.6MW.
Capacitance max: 32.6mF.
Frequency max: 150kHz.
Safety Rating; Cat III 600V, Cat II 1000V.
Warranty: 1 year.

Supplied with removable rubber holster with integral lead holders.

Fluke 1507/1503 Insulation Resistance Testers

The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable, and easy to use. With their multiple test voltages, they are ideal for many troubleshooting, commissioning, and preventative maintenance applications.
Additional features, like the remote probe on these tools save both time and money when performing tests
Features;
Insulation test range:
1507: 0.01 MΩ to 10 GΩ
1503: 0.1 MΩ to 2000 MΩ
Insulation test voltages:
1507: 50 V, 100 V, 250 V, 500 V, 1000 V
1503: 500 V, 1000 V
Save both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio (only available on the1507)
Make repetitive tests simple and easy with the 1507?s Compare (Pass/Fail) function (only available on the 1507)
Repetitive or hard-to-reach testing is easy with the remote test probe
Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
Auto-discharge of capacitive voltage for added user protection
AC/DC voltage: 0.1 V to 600 V
200 mA Continuity
Resistance: 0.01 Ω to 20.00 kΩ
Save battery power with auto power off
Read measurements easily with large, backlit display
CAT IV 600 V overvoltage category rating for added user protection
Remote probe, test leads, probes and alligator clips included with each tester
Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests
One year warranty



Specification;
AC/DC Voltage Measurement
Accuracy;
Range 600.0 V
Resolution 0.1 V
50 Hz to 400 Hz (% of Rdg + Digits) (2 % + 3)

Input impedance; 3 MΩ (nominal), < 100 pF

Common mode rejection ratio (1 kΩ unbalanced); > 60 dB at dc, 50 or 60 Hz

Overload Protection; 600 V rms or dc

Earth bond resistance measurement;
Range/Resolution; 20.00 Ω 0.01 Ω
200.0 Ω 0.1 Ω
2000 Ω 1.0 Ω
20.00 kΩ 0.01 kΩ

Accuracy; (1.5 % + 3)

Overload Protection; 2 V rms or dc

Open Circuit Test Voltage; > 4.0 V, < 8 V

Short circuit current; > 200.0 mA

Insulation specifications;
Measurement Range; 1507: 0.01 MΩ to 10 GΩ
1503: 0.01 MΩ to 2000 MΩ

Test voltage; 1507: 50 V, 100 V, 250 V, 500 V, 1000 V
1503: 500 V, 1000V

Test Voltage Accuracy; + 20 %, - 0 %

Short circuit current; 1 mA nominal

Auto Discharge; Discharge time < 0.5 second for C = 1 F or less

Live circuit indicator; Inhibit test if terminal voltage > 30 V prior to initialization of test

Maximum Capacitive Load; Operable with up to 1 F load

Measure Accuracy:
50 V: (3 % + 5)
100 V: (3 % + 5)
250 V: (1.5 % + 5)
500 V: (1.5 % + 5)
1000 V: (1.5 % + 5) to 2000 MΩ, (10 % + 3) above 2000 MΩ

General Specifications;
Maximum voltage applied to any terminal:600 V ac rms or dc

Storage Temperature; -40 C to 60 C (-40 F to 140 F)

Operating Temperature; -20 C to 55 C (-4 F to 131 F)

Temperature Coefficient; 0.05 x (specified accuracy) per C for temperatures < 18 C or > 28 C (< 64 F or > 82 F)

Relative Humidity;
0 % to 95 % @ 10 C to 30 C (50 F to 86 F)
0 % to 75 % @ 30 C to 40 C (86 F to 104 F)
0 % to 40 % @ 40 C to 55 C (104 F to 131 F)

Vibration; Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument

Shock; 1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor)

Electromagnetic compatibility: In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1:1997)

Safety; Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV)

Certifications: CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition

Batteries; Four AA batteries (NEDA 15A or IEC LR6)

Battery Life;
Insulation test use: Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
Resistance measurements: Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1 Ω with a duty cycle of 5 seconds on and 25 seconds off.

Size; 5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L)

Weight; 550 g (1.2 lb)

IP Rating; IP40

Altitude;
Operating: 2000 m CAT IV 600 V, 3000 m CAT III 600 V
Non-operating (storage): 12,000 m

Over-range capability: 110 % of range

Included accessories:TL224 Test Leads, TP74 Test Probes, clips PN 1958654 (red) and PN 1958646 (black), holster and remote probe

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

OJM826 Open Jaw Digital Multimeter

Ideal for electrical and electronic engineers. Automatic range and over range indication. Ten position rotary switch. Large, 25mm digital display with backlight. Measures current DC voltage, AC voltage, resistance, capacitance, frequency, other features include, relative measurement, data hold, diode test, continuity test and duty cycle test function. Supplied with 9V battery protective cover and stand, test probes operators' manual and deluxe fitted nylon case. Complies with IEC1010 for measurement up to 600V Cat III installations (and 1000V Cat II)

DISPLAY: 3999 Counts.
DCV: 4/40/400V /- 0.7% 1000V /- 0.8%ACV: 4/40/400V /- 0.8% 700V /- 1.0%ACA: 200A /- 3.0% (50Hz to 1000Hz)Ohm: 400/4k/40k/4M Ohm/- 1.2% 40M Ohm/-2.0%CAP: 40n/400n/4 mu /40 mu F /- 4.0%
FREQUENCY: 10Hz to 100Khz /- 2.0%DUTY CYCLE: 0.1% to 99.9%
BACKLIGHT AUTO OFF TIME LIMIT MODE

Digital Multimeter

AVO310
Designed for electricians, but are also suitable for a wide range of applications and users. Voltage max: 1000V AC/DC. Current max: 10A AC/DC. Resistance max: 40ohm. Continuity. Diode. Safety rating: Cat III 600V. Auto power off. Low battery indicator. Tilt stand/hanger. Other features: max/min, backlight.

Electrician's Multimeter

117
Ideal for demanding settings such as commercial buildings, hospitals and schools. Includes integrated non-contact voltage detection. Voltage max: 600V DC. Current max: 20A AC. Capacitance max: 1000uF. Frequency max: 50kHz. Continuity: 600. Diode: 2V. Safety rating: Cat III 600V. Warranty: 1 year.

10 Function Digital Multimeter with Temperature Probe

33XR-A
Gives the contractor and field service technician all the essential measurement functions they need in a rugged package. Temperature, frequency & capacitance. Extended 4000 mu F capacitance range for motor run/start testing.
Magne-Grip? holster with magnetic hanging strap. Data hold, Peak Hold, Min/Max and REL.
Display: LCD, 3-3/4-digit, 3999 Count
Measurement ranges:
Voltage: AC 0.1 mV-600V
Frequency range: 45-500Hz
Voltage: DC 0.1 mV-600V
Input impedance: 10M Ohm (use symbol)
Current: AC 0.1 mu A-10A
Frequency range: 45-500Hz
Current: DC 0.1 mu A-10A
Resistance: 0.1 Ohm -20M Ohm
Capacitance: 0.1 mu F-4000 mu F
Temperature: -20C - 1000C
Continuity: R 35 Ohm
Dimensions: 196 x 92 x 60mm
Weight: approx. 426g (incl. battery)

10-Function Manual Ranging Digital Multimeter

The new Amprobe 5XPA digital multimeter provides superior features and accuracy in a smaller form factor. The 5XP has unique features such as VolTect?; non-contact voltage (NCV) detection and our exclusive Magne-Grip?; holster that frees both hands for work. The 5XP is the right choice for residential, commercial and general troubleshooting applications.

Features: 27 ranges/10 functions a complete performance, general purpose digital multimeter VolTect Non-Contact Voltage Detector lets you instantly identify dangerous AC voltage Magne-Grip holster with magnetic strap frees both hands for work 2000-count 31/2 digit display 750Vac/1000Vdc highest voltage rating in this class of meter Resistance and continuity for troubleshooting bad connections Battery load test with 1.5 volt and 9 volt capabilities Min/Max records minimum and maximum values Data Hold freezes display to hold measurement reading.
Display: LCD, 3-1/2-digit, 1999 Count
Measurement ranges:
Voltage: AC 0.1mV - 750V (45-500Hz)
Voltage: DC 0.1mV - 1000V
Input impedance: 10M Ohm
Current: AC 1 mu A-200mA (45-500Hz)
Current: DC 1 mu A - 200mA
Resistance: 0.1 Ohm - 20M Ohm
Continuity: R 75 Ohm
Dimensions: 155 x 72 x 32mm
Weight: approx. 210g (incl. battery)

Volt Stick

An instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation. The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable. The PRO12 features a unique ?shielded? forktip for highly selective and accurate testing for presence of AC voltage in specific cables or wires. Ideal for professional, close proximity testing and installation work. Cables and connections can easily be checked in low voltage equipment too. Extremely safe when measuring in junction boxes, with the supplied field strength amplifier, anti-tamper, earthed outlets can be checked. Powerful red light in the tip to indicate voltage. Fully insulated for safe use.

Volt Stick PRO12