Amprobe Probe Style Multimeter for One-Hand Operation

DM73C
Unique pen shape for measuring in hard to get to places.
Two probe tip sizes, 75 and 13mm.
Data hold to freeze measurement value.
Includes alligator grounding clip.
3400-count digital plus analog bargraph.
Display: LCD, 3-3/4-digit, 3400 Count
Measurement ranges:
Voltage: AC 0,001 V...600V.
Frequency range: 50 Hz...500kHz.
Voltage: DC 0,1 mV...600V.
Input impedance: 10MO.
Resistance: 0,1 O...34MO.
Continuity: R 35O.
Cat III/300 V, Cat II/600V.
Dimensions: 198 x 29 x 35mm.
Weight: approx. 150g (incl. battery).

Volt Stick

Used for checking the presence of an AC voltage, locates break in cables, detects blown fuses and distinguishes between live and neutral wires in both single and three phase supply, without making any disconnection in cables, wall sockets etc. Volt Stick has a sensitivity of up to 4mm distance of a 2,5mm conductor carrying 220 - 400V. Note: The Volt Stick is for use on 50Hz supply only.

Voltage, continuity, diode and resistance in a credit card size meter

DM78C
5 functions/16 ranges. Continuity test: Buzzer alert. Auto power off saves batteries. Data Hold. Protective case included
Display: LCD, 3-3/4-digit,3400 Count
Mesaurement ranges:
Voltage: AC 0,001V?600V
Frequency range: (50~60Hz
Voltage: DC 0,1 mV?600V
Input impedance: 10MO
Resistance: 0,1 O?34MO
Continuity R: < 340 O
Dimensions: 130 x 77 x 18 mm
Weight: approx. 110g (incl. battery and case)

Stud Detector

Using this very practical device ensures no mishaps occur, or damage is caused, when drilling into drywall, plaster board and other common partition walling materials. It quickly and accurately locates below surface studs, joists, battens & live cables that would otherwise remain undetected. Two unique audible warning tones indicate obstructions, and a large LCD screen provides a visual indicator too.

0-77-355

Fluke Multimeters

These new clampmeters from Fluke, provide the highest level of safety and performance in a rugged ergonomic package. They are True RMS measuring to provide accurate measurements on today?s electronic systems.

Most models measure both AC & DC current and voltage, and have additional features to aid in troubleshooting everyday problems.

Designed to operate in harsh environments, some models have an integrated low pass filter and signal processing for stable readings in electrically noisy areas.

Models that feature Fluke's proprietary inrush measurement technology, filter out noise & capture motor starting current exactly as the circuit protection sees it.

374 True-rms AC Clamp Meter

The new Fluke 374 clamp meter offers improved performance perfect for many current measurement situations. With true-RMS AC voltage and current measurements, the Fluke 374 can read up to 600V and 600A in both AC and DC modes.


Fluke model number: 374
Application: Industrial/Residential/Commercial
Cable size jaw (& cable size iFlex): 34 mm (100mm)
i-flex flexible current probe included: Available separately.
True RMS: YES
AC Current (clamp) to: 600A
AC Current (i-flex) to: 2500A
DC Current (clamp) to: 600A
AC Voltage to: 600V
DC Voltage to: 600V
Resistance & Continuity: YES
Frequency to 400Hz: n/a
Temperature measurement -10°C to + 400°C: n/a
Motor Start-up (inrush current) capture: YES
Detachable 'jaw clamp' & torch: n/a
Low pass filter for noisy environments: n/a
Removable display operates up to 10 metres: n/a
mV range compatible with other accs: n/a
Min/Max logging: YES
Display backlight: YES
Display Hold: YES
Warranty (years): 3
Safety rating: CAT III 1000V, Cat IV 600 V

Note : Cat IV is a higher safety rating

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DM664 Digital Multimeter

DM664 Digital Multimeter specification: Extra large digits, temperature probe and short lead capacitor, removable rubber holster with lead holders. Continuity, diode, transistor hFE, auto power off, overload indication, low battery indicator, tilt stand/hanger.

Voltage (max): 700V AC 1000V DC.
Current (max): 10A AC/DC.
Resistance (max): 200MW.
Capacitance (max): 200mF.
Frequency (max): 20kHz.
Temperature (max): -20 to 1000C.
Safety Rating: Cat III 600V. Cat II 1000V.
1 year warranty.
Supplied with holster.

Magnet Stick

Upon testing and without metallic contact, the lamp lights immediately where there is a magnetic field; eg, an activated coil in a solenoid valve. Equipment can be tested without having to switch it off and magnetic coils can often be tested through their protective cover, saving hours of dismantling time. The Magnetic Stick responds to all kinds of magnetic fields - from alternating or direct current, to permanent magnets. Operating Temperature: -20C up to 50C. Power Requirements: 2 standard AAA batteries.

True RMS Multimeter

Compact true-rms meter for HVAC (heating ventilation air conditioning) troubleshooting. Specifically designed for the HVAC professional. It has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors.
Includes holster, 4mm silicone test lead set 9V battery and user manual.

Fluke Universal Test Leads

TL71-1
One pair (red, black) flexible and heat resistant silicone test leads with WearGuard™ and comfort grip probes. 48 inches long with right-angle shrouded banana plugs. Especially recommended if you make low voltage mu V measurements. CAT II 1000V, 10A rating : IEC 61010-031:2002 +A1:2008. WearGuard™ exposes contrasting colour when leads are damaged and need replacing. One year warranty.

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

OJM826 Open Jaw Digital Multimeter

Ideal for electrical and electronic engineers. Automatic range and over range indication. Ten position rotary switch. Large, 25mm digital display with backlight. Measures current DC voltage, AC voltage, resistance, capacitance, frequency, other features include, relative measurement, data hold, diode test, continuity test and duty cycle test function. Supplied with 9V battery protective cover and stand, test probes operators' manual and deluxe fitted nylon case. Complies with IEC1010 for measurement up to 600V Cat III installations (and 1000V Cat II)

DISPLAY: 3999 Counts.
DCV: 4/40/400V /- 0.7% 1000V /- 0.8%ACV: 4/40/400V /- 0.8% 700V /- 1.0%ACA: 200A /- 3.0% (50Hz to 1000Hz)Ohm: 400/4k/40k/4M Ohm/- 1.2% 40M Ohm/-2.0%CAP: 40n/400n/4 mu /40 mu F /- 4.0%
FREQUENCY: 10Hz to 100Khz /- 2.0%DUTY CYCLE: 0.1% to 99.9%
BACKLIGHT AUTO OFF TIME LIMIT MODE