77-IV

The 77-IV has the features needed to repair most electrical and electronic problems. A large display and backlight assists work in dim areas. Minium/Maxium to record signal fluctuations. Ergonomic overmolded housing with integrated probe holders. Auto and manual ranging and it meets Measurement Category 1000

It measures:
Wide 1000 V measurement range
Average responding AC measurements
0.3% accuracy
10 Amps continuous (20A for 30 seconds)
Frequency and capacitance
Resistance and continuity

Measurement Category IV safety rating

IntelliSensor&153; Pro Stud Sensor

Locates the edge of studs or joists through drywall and other common wall materials at a maximum depth of 1/2&34; and 11/2&34;. Automatic calibration switch. Multi-mode LED panel for depth indication. Buzzer indicates stud and joist edges. High impact ABS housing for strength and durability. Large, patented LCD screen for visual detection warning. Continuous live wire detection. Requires a 9V battery (not included). Automatic shut-off for longer battery life.

AM530

The Amprobe AM-500 series provides a model to cover commercial and advanced residential applications, the HVAC professional or electrical contractors. Features include a built-in flashlight to see wires and fuses in the dark, flame sensors, a Velcro strap and a carry case.



The Amprobe AM-530 is the fully-featured multimeter of choice for the professional electrical contractor. Measure and verify presence of voltage in order to connect equipment or to perform repairs, run new wiring, check continuity of electrical connections, identify blown fuses, troubleshoot motors or check transformers. The AM-530 features true-rms sensing to accurately measure voltage on systems affected by harmonics, a built in flashlight to detect wire colors in the dark, a oethird hand” probe holder and VolTect non-contact voltage detection.Voltage max: 400 AC/DC.

Current max: 400 AC/DC.
Temp. range: -40°C to +1000°C
Frequency: 10Hz - 10MHz.
Capacitance max: 400 mu F.
Safety rating: CAT III 600V, CAT II 1000V.
Weight: approx. 851g (incl. battery).

Fluke Multimeters

These new clampmeters from Fluke, provide the highest level of safety and performance in a rugged ergonomic package. They are True RMS measuring to provide accurate measurements on today?s electronic systems.

Most models measure both AC & DC current and voltage, and have additional features to aid in troubleshooting everyday problems.

Designed to operate in harsh environments, some models have an integrated low pass filter and signal processing for stable readings in electrically noisy areas.

Models that feature Fluke's proprietary inrush measurement technology, filter out noise & capture motor starting current exactly as the circuit protection sees it.

375 True-rms AC Clamp Meter

The new Fluke 375 clamp meter offers improved performance perfect for many current measurement situations. With true-RMS AC voltage and current measurements, the Fluke 375 can read up to 600V and 600A in both AC and DC modes.

Fluke model number: 375
Application: Industrial
Cable size jaw (& cable size iFlex): 34 mm (100mm)
i-flex flexible current probe included: optional
True RMS: YES
AC Current (clamp) to: 1000A
AC Current (i-flex) to: 2500A
DC Current (clamp) to: 1000A
AC Voltage to: 600V
DC Voltage to: 600V
Resistance & Continuity: YES
Frequency to 400Hz: YES
Temperature measurement -10°C to + 400°C: n/a
Motor Start-up (inrush current) capture: YES
Detachable jaw clamp & torch: n/a
Low pass filter for noisy environments: YES
Removable display operates up to 10 metres: n/a
mV range compatible with other accs: YES
Min/Max logging: YES
Display backlight: YES
Display Hold: YES
Warranty (years): 3
Safety rating: CAT III 1000 V, Cat IV 600 V

Note : Cat IV is a higher safety rating

Fluke Test Leads

Set contents: Industrial test probes, rectangle test leads and heavy duty alligator clips. Fused test leads. Can be used with most multimeters.

Fluke Universal Test Leads

TL71-1
One pair (red, black) flexible and heat resistant silicone test leads with WearGuard™ and comfort grip probes. 48 inches long with right-angle shrouded banana plugs. Especially recommended if you make low voltage mu V measurements. CAT II 1000V, 10A rating : IEC 61010-031:2002 +A1:2008. WearGuard™ exposes contrasting colour when leads are damaged and need replacing. One year warranty.

Fluke Electronic Test Lead Set

TL80A-1
Economical accessories for making measurements in low energy, electronic applications. One pair (red, black) each 1 meter long WearGuard™ test lead set, TL71-1. Exposes contrasting colour when leads are damaged and need replacing. Compatible with all instruments that accept standard 4mm, shrouded banana connectors. EN/IEC 61010-031:2002 +A1:2008. Includes: alligator clips, 5A max. insulated extended probe tips, 3A max. C75 soft carrying case. One year warranty.

Volt Stick SOUND

The original and still the best, is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation. The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.
The brand new Volt Stick SOUND now features a detection buzzer for even greater clarification. Also ideal for detection round corners', in bright daylight and in awkward out of sight areas. High visibility green tube for ease of identification if dropped or hidden in the toolbox.
Features:
Added Bleeper' feature
Locates breaks in cables
Detects blown fuses inside plugs or fuse holders
Distinguishes between live and neutral wires in both single and three-phase supplies
Identifies voltage-carrying cables in junction boxes
Identifies faulty in-line switches
Locates defective in-series light bulbs



Specifications
Model: Volt Stick SOUND:
Voltage range: 220 ~ 230 Volts AC
Sensitivity: Functions @ 4mm distance from 2.5mm
conductor carrying 220V AC
Response Time: Immediate
Intrinsically Safe: No
Power Requirements: 2 x AAA (LR03) batteries (inc)
RH: 80% @ 30C, 50% @ 40C
Operating Temp: -10 ~ +50C
Overvoltage: CAT III 1000V AC
Dimensions: 145(L) x 18(W) x 20(H) mm
Weight: 40g (inc.batteries)
All models are fully approved to IEC 61010-1, CAT111 1000V AC and CE.

Multi Detector

Locates live cables, metals or wooden substructures in walls or ceilings. It is the only tool on the market that calibrates itself, therefore preventing errors caused by incorrect calibration.
Specifications:
Max. detection depth: Ferrous metals/Non-ferrous metals/Live cables/Wood - 120/80/50/38mm
Auto shutdown: 5 mins
Batteries: 1x 9V
Dimensions: 200 x 85 x 32mm (LxWxH).
Weight: 270g

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DM383 Digital Multimeter

The DM383 Digital Multimeter from Edison™ is a compact unit that has a removable rubber protective holder, that protects it against the bumps and knocks encountered on site.

Features include:
Continuity testing.
Transistor hFE.
Reading/peak hold.
Fused current range.
Auto power off.
Overload indication.
Low battery indication.
Tilt stand/hanger.

DM383 specification
Voltage max: 600V AC/600V DC.
Current max: 10A DC.
Resistance max: 2M Ohms.
Safety rating: Cat II.
Supplied complete with: 9V battery.
1 year warranty.
Supplied with holster.

For the full range of Edison™ multimeters please refer to the catalogue PDF or enter the search EDI-516.