Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM060 Auto Range Digital Multimeter with USB Interface

Ideal for electrical troubleshooting & straightforward maintenance, initial start-up testing & R&D in industry.

The digital multimeter with its USB interface for the
PC is capable of testing the following;
- Electrical testing.
- Temperature testing (K Type) from -5°C to 1000°C.

AC voltage up to 700V.
DC voltage up to 1000V.
AC/DC current up to 10A.
Resistance up to 60MW.
Capacitance up to 300mF.
Frequency/Duty cycle from 1Hz to 1MHz.
Diode testing & buzzer.
Relative measurement function.
Clear display with LED back light & data hold function.
Auto power off & low power indicator.
Auto/manual range.
Electronic protection system.
Digital display count up to 6000.
Conforms to IEC 1010, CAT II 1000V & CAT III 600V.

Pack includes:
- Digital Multimeter
- Test probes
- Temperature sensor
- Clamp-on test lead
- USB Interface
- CD ROM 'PC-LINK' software (Compatible with Windows 2000, NT or XP)
- 9V battery (installed)
- Instruction manual

PC-LINK software features:
- Measure graph
- Measure data record
- Simulate LCD display
- Analogue dial plate display
- Measure Max/Min display
- Sampling interval
- Graph export
- Measure data save

Dimensions: 165(W) x 65(D) x 230(H) mm
182g Gross Weight

IntelliSensor&153; Pro Stud Sensor

Locates the edge of studs or joists through drywall and other common wall materials at a maximum depth of 1/2&34; and 11/2&34;. Automatic calibration switch. Multi-mode LED panel for depth indication. Buzzer indicates stud and joist edges. High impact ABS housing for strength and durability. Large, patented LCD screen for visual detection warning. Continuous live wire detection. Requires a 9V battery (not included). Automatic shut-off for longer battery life.

Voltage, continuity, diode and resistance in a credit card size meter

DM78C
5 functions/16 ranges. Continuity test: Buzzer alert. Auto power off saves batteries. Data Hold. Protective case included
Display: LCD, 3-3/4-digit,3400 Count
Mesaurement ranges:
Voltage: AC 0,001V?600V
Frequency range: (50~60Hz
Voltage: DC 0,1 mV?600V
Input impedance: 10MO
Resistance: 0,1 O?34MO
Continuity R: < 340 O
Dimensions: 130 x 77 x 18 mm
Weight: approx. 110g (incl. battery and case)

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DCM998A Digital Multimeter

DCM998A Digital Multimeter specification:
Large digits, max alert, fitted ABS case. Continuity, reading/peak hold, back light, overload indication, low battery indicator.

Voltage max:750V AC, 1000V DC.
Current max: 1000A AC.
Resistance max: 2000MW.
Jaw opening max: 55mm.
Safety rating: Cat II.
Warranty: 1 year.
Supplied with case.

Fluke Test Leads

TL75-1
One pair (red, black) PVC insulated test leads with WearGuard™ and comfort grip probes, 48 inches long with right-angle shrouded banana plugs. Recommended for general purpose measurements. CAT II 1000V, 10A rating:IEC 61010-031:2002 +A1:2008. WearGuard™ exposes contrasting colour when leads are damaged and need replacing. One year warranty.

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM075 Auto Range Digital Multimeter

Ideal for electrical troubleshooting and temperature testing in residential & commercial environments.

The 2-in-1 digital multimeter is capable for the following tasks:
- Electrical testing using test probes, no contact voltage detection & testing for wiring faults.
- Testing temperature from -20°C to 1000°C.

AC voltage up to 750V.
DC voltage up to 1000V.
AC/DC current up to 10A.
Resistance up to 40MW.
Capacitance up to 200mF.
Relative measurement function.
Diode testing facility.
Clear display with LED back light & data hold function.
Auto power OFF? & low power indicator.
Digital display count up to 3999.
Conforms with IEC 1010, CAT II 1000V & CAT III 600V.

Pack includes:
- Digital multimeter
- Test probes
- Temperature sensor probe
- DC1.5V x3 AAA batteries (installed)
- Instruction manual

Product dimensions: 152(W) x 45(D) x 190(H) mm
416g Gross Weight

10 Function Digital Multimeter with Temperature Probe

33XR-A
Gives the contractor and field service technician all the essential measurement functions they need in a rugged package. Temperature, frequency & capacitance. Extended 4000 mu F capacitance range for motor run/start testing.
Magne-Grip? holster with magnetic hanging strap. Data hold, Peak Hold, Min/Max and REL.
Display: LCD, 3-3/4-digit, 3999 Count
Measurement ranges:
Voltage: AC 0.1 mV-600V
Frequency range: 45-500Hz
Voltage: DC 0.1 mV-600V
Input impedance: 10M Ohm (use symbol)
Current: AC 0.1 mu A-10A
Frequency range: 45-500Hz
Current: DC 0.1 mu A-10A
Resistance: 0.1 Ohm -20M Ohm
Capacitance: 0.1 mu F-4000 mu F
Temperature: -20C - 1000C
Continuity: R 35 Ohm
Dimensions: 196 x 92 x 60mm
Weight: approx. 426g (incl. battery)

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM668 Digital Multimeter

DAM668 Digital Multimeter Features include:
Continuity, diode, transistor hFE, auto ranging, reading/peak hold, bar graph, fused current range, overload indication: low battery indicator, tilt stand/hanger.

Voltage max: 700V AC 1000V DC.
Current max: 10A AC/DC.
Resistance max: 32.6MW.
Capacitance max: 32.6mF.
Frequency max: 150kHz.
Safety Rating; Cat III 600V, Cat II 1000V.
Warranty: 1 year.

Supplied with removable rubber holster with integral lead holders.

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM332 Pocket Digital Multimeter

Pocket sized with integral lead storage. Features include continuity, diode, reading/peak hold, fused current range, auto power off, overload indication, low battery indication.

Voltage max: 600V AC 600V DC.
Current max: 400mA AC/DC.
Resistance max: 40MW.
Safety rating: Cat II.
1 year warranty.
Supplied with wallet.

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DM664 Digital Multimeter

DM664 Digital Multimeter specification: Extra large digits, temperature probe and short lead capacitor, removable rubber holster with lead holders. Continuity, diode, transistor hFE, auto power off, overload indication, low battery indicator, tilt stand/hanger.

Voltage (max): 700V AC 1000V DC.
Current (max): 10A AC/DC.
Resistance (max): 200MW.
Capacitance (max): 200mF.
Frequency (max): 20kHz.
Temperature (max): -20 to 1000C.
Safety Rating: Cat III 600V. Cat II 1000V.
1 year warranty.
Supplied with holster.