13 Function True RMS Digital Multimeter

37XR-A
For electronics troubleshooting The highest accuracy meter in the XR series. Autoranging 10,000 count with 0.1% accuracy for the most accurate measurements. LCR functions: inductance, capacitance and resistance. Frequency, duty cycle and logic test. Bright blue backlight for dim environments. Magne-Grip? holster with magnetic hanging strap.
Display: LCD, 4-3/4 digit, 9999 Count
Mesaurement ranges:
Voltage: AC 0.1mV-750V RMS
Frequency range: 45 Hz-2kHz
Voltage: DC 0.1mV-1000V
Input impedance: 10M Ohm
Current: AC 0.01 mu A-10A RMS
Frequency range: 45 Hz-1kHz
Current: DC 0.01 mu A-10A
Resistance: 0.1 Ohm-40M Ohm
Continuity: R 40 Ohm
Duty cycle: 0 to 90%
Frequency: 3.00 Hz-10MHz
Capacity: 0.01 nF-400 mu F
Inductivity: 1 mu H-40H
dBm reading: -13 dBm to 50dBm
Dimensions: 196 x 92 x 60mm
Weight: approx.482g (incl. battery)

Magnet Stick

Upon testing and without metallic contact, the lamp lights immediately where there is a magnetic field; eg, an activated coil in a solenoid valve. Equipment can be tested without having to switch it off and magnetic coils can often be tested through their protective cover, saving hours of dismantling time. The Magnetic Stick responds to all kinds of magnetic fields - from alternating or direct current, to permanent magnets. Operating Temperature: -20C up to 50C. Power Requirements: 2 standard AAA batteries.

10-Function Manual Ranging Digital Multimeter

The new Amprobe 5XPA digital multimeter provides superior features and accuracy in a smaller form factor. The 5XP has unique features such as VolTect?; non-contact voltage (NCV) detection and our exclusive Magne-Grip?; holster that frees both hands for work. The 5XP is the right choice for residential, commercial and general troubleshooting applications.

Features: 27 ranges/10 functions a complete performance, general purpose digital multimeter VolTect Non-Contact Voltage Detector lets you instantly identify dangerous AC voltage Magne-Grip holster with magnetic strap frees both hands for work 2000-count 31/2 digit display 750Vac/1000Vdc highest voltage rating in this class of meter Resistance and continuity for troubleshooting bad connections Battery load test with 1.5 volt and 9 volt capabilities Min/Max records minimum and maximum values Data Hold freezes display to hold measurement reading.
Display: LCD, 3-1/2-digit, 1999 Count
Measurement ranges:
Voltage: AC 0.1mV - 750V (45-500Hz)
Voltage: DC 0.1mV - 1000V
Input impedance: 10M Ohm
Current: AC 1 mu A-200mA (45-500Hz)
Current: DC 1 mu A - 200mA
Resistance: 0.1 Ohm - 20M Ohm
Continuity: R 75 Ohm
Dimensions: 155 x 72 x 32mm
Weight: approx. 210g (incl. battery)

Volt Stick

An instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation. The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable. The PRO12 features a unique ?shielded? forktip for highly selective and accurate testing for presence of AC voltage in specific cables or wires. Ideal for professional, close proximity testing and installation work. Cables and connections can easily be checked in low voltage equipment too. Extremely safe when measuring in junction boxes, with the supplied field strength amplifier, anti-tamper, earthed outlets can be checked. Powerful red light in the tip to indicate voltage. Fully insulated for safe use.

Volt Stick PRO12

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DCM007 Auto Range True RMS 1000A AC/DC Digital Clamp Meters

Ideal for electrical troubleshooting & testing in commercial environments.
The AC/DC digital multimeter is capable of testing for the following;
- Telephone networks.
- Fuse connections.

AC voltage up to 750V.
DC voltage up to 1000V.
AC/DC current up to 1000A.
Resistance up to 60MW.
Frequency up to 100kHz.
Frequency from clamp up to 400Hz.
Diode testing facility.
Continuity Buzzer.
Clear display with LED backlight & data hold function.
Auto power off & low power indicator.
Auto range facility.
4 segments bar graph
Digital display count up to 3999.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.

Pack includes:
- Digital Clamp Multimeter
- Test probes
- 3x DC1.5V AAA batteries (installed)
- Instruction manual
- Protective case with carry handle

Product Dimensions: 140(W) x 58(D) x 260(H) mm
606g Gross Weight

Fluke 1507/1503 Insulation Resistance Testers

The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable, and easy to use. With their multiple test voltages, they are ideal for many troubleshooting, commissioning, and preventative maintenance applications.
Additional features, like the remote probe on these tools save both time and money when performing tests
Features;
Insulation test range:
1507: 0.01 MΩ to 10 GΩ
1503: 0.1 MΩ to 2000 MΩ
Insulation test voltages:
1507: 50 V, 100 V, 250 V, 500 V, 1000 V
1503: 500 V, 1000 V
Save both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio (only available on the1507)
Make repetitive tests simple and easy with the 1507?s Compare (Pass/Fail) function (only available on the 1507)
Repetitive or hard-to-reach testing is easy with the remote test probe
Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
Auto-discharge of capacitive voltage for added user protection
AC/DC voltage: 0.1 V to 600 V
200 mA Continuity
Resistance: 0.01 Ω to 20.00 kΩ
Save battery power with auto power off
Read measurements easily with large, backlit display
CAT IV 600 V overvoltage category rating for added user protection
Remote probe, test leads, probes and alligator clips included with each tester
Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests
One year warranty



Specification;
AC/DC Voltage Measurement
Accuracy;
Range 600.0 V
Resolution 0.1 V
50 Hz to 400 Hz (% of Rdg + Digits) (2 % + 3)

Input impedance; 3 MΩ (nominal), < 100 pF

Common mode rejection ratio (1 kΩ unbalanced); > 60 dB at dc, 50 or 60 Hz

Overload Protection; 600 V rms or dc

Earth bond resistance measurement;
Range/Resolution; 20.00 Ω 0.01 Ω
200.0 Ω 0.1 Ω
2000 Ω 1.0 Ω
20.00 kΩ 0.01 kΩ

Accuracy; (1.5 % + 3)

Overload Protection; 2 V rms or dc

Open Circuit Test Voltage; > 4.0 V, < 8 V

Short circuit current; > 200.0 mA

Insulation specifications;
Measurement Range; 1507: 0.01 MΩ to 10 GΩ
1503: 0.01 MΩ to 2000 MΩ

Test voltage; 1507: 50 V, 100 V, 250 V, 500 V, 1000 V
1503: 500 V, 1000V

Test Voltage Accuracy; + 20 %, - 0 %

Short circuit current; 1 mA nominal

Auto Discharge; Discharge time < 0.5 second for C = 1 F or less

Live circuit indicator; Inhibit test if terminal voltage > 30 V prior to initialization of test

Maximum Capacitive Load; Operable with up to 1 F load

Measure Accuracy:
50 V: (3 % + 5)
100 V: (3 % + 5)
250 V: (1.5 % + 5)
500 V: (1.5 % + 5)
1000 V: (1.5 % + 5) to 2000 MΩ, (10 % + 3) above 2000 MΩ

General Specifications;
Maximum voltage applied to any terminal:600 V ac rms or dc

Storage Temperature; -40 C to 60 C (-40 F to 140 F)

Operating Temperature; -20 C to 55 C (-4 F to 131 F)

Temperature Coefficient; 0.05 x (specified accuracy) per C for temperatures < 18 C or > 28 C (< 64 F or > 82 F)

Relative Humidity;
0 % to 95 % @ 10 C to 30 C (50 F to 86 F)
0 % to 75 % @ 30 C to 40 C (86 F to 104 F)
0 % to 40 % @ 40 C to 55 C (104 F to 131 F)

Vibration; Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument

Shock; 1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor)

Electromagnetic compatibility: In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1:1997)

Safety; Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV)

Certifications: CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition

Batteries; Four AA batteries (NEDA 15A or IEC LR6)

Battery Life;
Insulation test use: Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
Resistance measurements: Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1 Ω with a duty cycle of 5 seconds on and 25 seconds off.

Size; 5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L)

Weight; 550 g (1.2 lb)

IP Rating; IP40

Altitude;
Operating: 2000 m CAT IV 600 V, 3000 m CAT III 600 V
Non-operating (storage): 12,000 m

Over-range capability: 110 % of range

Included accessories:TL224 Test Leads, TP74 Test Probes, clips PN 1958654 (red) and PN 1958646 (black), holster and remote probe

Digital Multimeter

AVO310
Designed for electricians, but are also suitable for a wide range of applications and users. Voltage max: 1000V AC/DC. Current max: 10A AC/DC. Resistance max: 40ohm. Continuity. Diode. Safety rating: Cat III 600V. Auto power off. Low battery indicator. Tilt stand/hanger. Other features: max/min, backlight.

VC30A Vinyl carrying case

Vinyl case to suit the 30 series multimeters.

Volt Stick SOUND

The original and still the best, is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation. The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.
The brand new Volt Stick SOUND now features a detection buzzer for even greater clarification. Also ideal for detection round corners', in bright daylight and in awkward out of sight areas. High visibility green tube for ease of identification if dropped or hidden in the toolbox.
Features:
Added Bleeper' feature
Locates breaks in cables
Detects blown fuses inside plugs or fuse holders
Distinguishes between live and neutral wires in both single and three-phase supplies
Identifies voltage-carrying cables in junction boxes
Identifies faulty in-line switches
Locates defective in-series light bulbs



Specifications
Model: Volt Stick SOUND:
Voltage range: 220 ~ 230 Volts AC
Sensitivity: Functions @ 4mm distance from 2.5mm
conductor carrying 220V AC
Response Time: Immediate
Intrinsically Safe: No
Power Requirements: 2 x AAA (LR03) batteries (inc)
RH: 80% @ 30C, 50% @ 40C
Operating Temp: -10 ~ +50C
Overvoltage: CAT III 1000V AC
Dimensions: 145(L) x 18(W) x 20(H) mm
Weight: 40g (inc.batteries)
All models are fully approved to IEC 61010-1, CAT111 1000V AC and CE.

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DM664 Digital Multimeter

DM664 Digital Multimeter specification: Extra large digits, temperature probe and short lead capacitor, removable rubber holster with lead holders. Continuity, diode, transistor hFE, auto power off, overload indication, low battery indicator, tilt stand/hanger.

Voltage (max): 700V AC 1000V DC.
Current (max): 10A AC/DC.
Resistance (max): 200MW.
Capacitance (max): 200mF.
Frequency (max): 20kHz.
Temperature (max): -20 to 1000C.
Safety Rating: Cat III 600V. Cat II 1000V.
1 year warranty.
Supplied with holster.