Volt Stick

Used for checking the presence of an AC voltage, locates break in cables, detects blown fuses and distinguishes between live and neutral wires in both single and three phase supply, without making any disconnection in cables, wall sockets etc. Volt Stick has a sensitivity of up to 4mm distance of a 2,5mm conductor carrying 220 - 400V. Note: The Volt Stick is for use on 50Hz supply only.

Fluke VoltAlert™ Voltage Detector

2AC
2AC is the latest addition to the VoltAlert™ ac non-contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energised circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.

Specifications:
Voltage detection from 200 to 1000V AC, suitable for a wide range of residential, commercial and industrial needs. Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready. Innovative ‘battery check’ button function ensures battery is in good condition. Category IV – 1000V over-voltage rated product for best in class user protection. Integrated clip design, optimised for pocket storage. Powered by 2x AAA batteries (included). Fluke ruggedness and reliability. Two-year warranty.

Stud Detector

Using this very practical device ensures no mishaps occur, or damage is caused, when drilling into drywall, plaster board and other common partition walling materials. It quickly and accurately locates below surface studs, joists, battens & live cables that would otherwise remain undetected. Two unique audible warning tones indicate obstructions, and a large LCD screen provides a visual indicator too.

0-77-355

FLUKE T5-600 Electrical Tester

Checks voltage, continuity and current. Integral test lead storage. OpenJaw current allows checking of current up to 100 amps without breaking the circuit. Measures Volts ac/dc and resistance, continuity beeper, data hold button, detachable Slim-Reach probe tips, two years manufacturers warranty. All inputs are protected to EN61010-1 Cat III 600V.

Electrical Tester T100

Voltage test, optical and acoustical continuity test, rotary field indication, single pole test for phase detection, indication of polarity, electrical torch function.
Voltage (max): 690V AC/DC.
Continuity (max): 400kW.
Frequency (max): 400Hz.
Safety rating: Cat IIII 600V.

Fluke TPAK ToolPak?

The meter hanging solution
?Kit includes, universal hanger clips (2), hook & loop straps (2 lengths) and strong magnet
?Combine components to meet most hanging needs
?Attaches to back of a 110/170/180 Series meter, 20/70 -III with integrated holster (with adapter), 724/725 and 50 Series II
One year warranty

Magnet Stick

Upon testing and without metallic contact, the lamp lights immediately where there is a magnetic field; eg, an activated coil in a solenoid valve. Equipment can be tested without having to switch it off and magnetic coils can often be tested through their protective cover, saving hours of dismantling time. The Magnetic Stick responds to all kinds of magnetic fields - from alternating or direct current, to permanent magnets. Operating Temperature: -20C up to 50C. Power Requirements: 2 standard AAA batteries.

Electrician's Multimeter

117
Ideal for demanding settings such as commercial buildings, hospitals and schools. Includes integrated non-contact voltage detection. Voltage max: 600V DC. Current max: 20A AC. Capacitance max: 1000uF. Frequency max: 50kHz. Continuity: 600. Diode: 2V. Safety rating: Cat III 600V. Warranty: 1 year.

Fluke Universal Test Leads

TL71-1
One pair (red, black) flexible and heat resistant silicone test leads with WearGuard™ and comfort grip probes. 48 inches long with right-angle shrouded banana plugs. Especially recommended if you make low voltage mu V measurements. CAT II 1000V, 10A rating : IEC 61010-031:2002 +A1:2008. WearGuard™ exposes contrasting colour when leads are damaged and need replacing. One year warranty.

Basic, Hand-held Safety Checker

The Primetest 50 offers exceptional lightness and portability as well as a simplified range of tests. Simply choose the test you require; either earthed appliance, double insulated appliance, or mains cord testing. The simple display shows whether it's a Pass or Fail, it could be easier. If toughness is an issue, don't worry, the rugged outer casing will stand up to anything a normal working environment has to offer. A great choice for those needing a reliable, easy to use, portable safety tester.

Key Features
Easy to use
What can be easier than simple push-button operation Connect your test appliance, pick your test mode, push the button. The display
tells whether it has passed or failed. Done.
Hand-held - Highly Portable
The Primetest 50 is tiny compared to the competition. Measuring only 26 x 10cm, it fits easily in the palm of your hand.
Battery Powered
This means it's lighter, easier to use and more portable, as you no longer need a power supply nearby. Freedom to move.
PATGuard Compatible
To help make your life as a tester even easier, the Primetest 50 can be used with our industry acclaimed PATGuard Workabout software for mobile data input. Now you have the best of both worlds - easy testing and easy information management.

Main Users:
Maintenance Staff
Schools & Colleges
Care Homes
Leisure Industry

PAT TESTS
Earth Continuity
Test Current /- 200mA DC
PASS/FAIL Threshold 0.2ohms
Insulation Resistance
Test Voltages 500V DC
PASS/FAIL Threshold 2Mohms
IEC Lead Test
Tests Performed Earth Continuity
Insulation Resistance
Live, Neutral Continuity and Polarity

CIRCUIT TESTS
Power Socket Test
Input Voltage range 230V 10%, -15% AC
Indicators Phase to Earth Voltage
Phase to Neutral Voltage
Neutral to Earth

ADDITIONAL INFORMATION
Weight / Dimensions
Weight & Dimensions 800g/ 26cm (l) x 10cm (w) x 5.5cm (d)
Power Source
6 x AA Batteries