Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

BSW - Medium Class Tolerance

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

Metric Coarse - Class 6H Tolerance

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Moore & Wright Digitronic External Calipers

MW442-03DC:
Range: 20-30mm/0.8-1.2".

Features:
Large LCD display.
0.01mm or 0.0005" resolution.
Preset capability.
Direct Inch/Metric conversion.
Absolute/Incremental measurements.

Senator® Digital Calipers

Large display for clarity. Fast response speed. Zero reset. Dual readout mm/inch. Multi-use, inside, outside, depth and step measuring. Knurled thumb grip for precise movement.

Senator® 200/8" Digital Caliper

Blade Micrometers - Satin Chrome Finished Frame

For the measurement of narrow grooves in forming tools, shaft diameters, keyways, splines, etc. The spindle is non-rotating, the anvils hardened and precision lapped. Made of forged steel the frame is fitted with heat plates. The sleeve and thimble are satin finished. Blade thickness: 0.030" (0.75mm). Measuring Depth: 0.25" (6.5mm). Parallelism: 0.00012"/3mm up to 2"/50mm. (3L/100)mm, (0.000120.00004L/4)" for models over 2"/50mm. Graduation: 0.0001" (0.01mm). Blade dimensions: a: 0.256" (6.5mm), b: 0.236" (6mm), c: 0.030" (0.75mm). Accuracy: /-3mm for up to 75mm, /-4mm for 75-100mm

122 Series

Accuracy:
3mm for up to 75mm.
4mm for 75 - 100mm.

Mitutoyo ABSolute Coolant Proof Digimatic Calipers

IP67 inside/outside digital caliper with depth bar and ABSOLUTE scale. Superb resistance to water, oil, dust and coolant, making it ideal for tough workshop applications.
Easy to read LCD display. internal, external, height and step measurement (quadri feature). Inch/metric conversion. Origin setting with intelligent memory that retains this setting even with the power off. Zero setting.
No overspeed error. Locknut.
Accuracy: 0.02mm/0.001".
Resolution: 0.01mm/0.0005".
Protection: IP67.
Extra batteries available - Order Code ENR -904-0150K.

Economy Series 500

With Data Output

Azlon PP Printed Graduation Measuring Cylinders

Clear, pin sharp blue graduations. Conforms to class B tolerances. Ultra clear polypropylene, with good chemical resistance. Large pouring spout for easy dispensing. Stable hexagonal bases with non slip anti-suction feature. Easy to read as liquids have virtually no meniscus in plastic cylinders.

Available in 25ml, 50ml, 100ml and 500ml capacities. Other sizes on request.

Polypropylene Containers

Designed specifically for sampling within the food and industrial laboratories. Manufactured from shatterproof polypropylene for maximum safety. Will surface when dropped into aqueous solutions. Deep threaded cap to ensure sample containment. Extensive range from 30ml to 125ml. Aseptically manufactured. Colour base/cap: Clear/white. Materials base/cap: (PP/PE) Polypropylene, polyethylene. Sterility: (AS) Aseptic Manufacture.

Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232 data output. Preset facility for inputting ring size. True metric/imperial conversion.\tResolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 6mm capacity. Setting rings come complete with UKAS calibration certificate.Accuracy: Units between 2-50mm:\t0.004mm. Units between 50-200mm:\t0.005mm. Units between 200-300mm:\t0.007mm.

Complete sets

Supplied with: Digital pistol grip, head and setting rings.