Kennedy® Easy Read Dial Gauges Plunger Type

Easy Read Dial Gauges & DTI's are designed for countless applications and available in two basic styles. With shockproof mechanisms and clear, "Easy Read" faces for zero setting. All models are operational in both directions. Supplied in fitted cases with accessories storage space. Matt finish chromed housings and black oxidised limit hands. Fitted with 1/4" inside diameter off-set back lug and 5/16" diameter stem. Manufactured to BS 907.



58mm (2.1/4") Dial Diameter

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

Metric Fine - Class Tolerance 6G

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

Metric Coarse - Class 6H Tolerance

Azlon Classic Design Graduated PP Beakers

Popular, classic Azlon beakers designed to BS5404: Part 1 1976. Good chemical resistance. Can withstand temperatures up to 135C. Graduations and an indication of material and maximum heat resistance are clearly printed using indelible solvent resistant ink.

Available in capacities: 25ml, 50ml, 100ml, 250ml, 400ml and 1000ml, as singles or in packs of 10 (N.B. 1000ml version, single or pack of 5 only).

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

Metric Coarse - Class 6H Tolerance

Heavy Duty Long Jaw

Longer jaws allow measurements to be taken where a standard caliper would not reach. Fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 534

MTR110 Surface Roughness Tester

The Moore & Wright Surfmatic MTR110 is a pocket sized surface roughness measuring instrument ideally suited to rapid on-the-spot surface measurements.

Features:
Back-light LCD.
Dynamic Test Display: progress of cut-off length during testing.
Li-ion rechargeable batteries.
Protection slide on pick-up.
Auto-off after 90 seconds.
Pocket-size and economically priced.
Both Ra and Rz parameters in one instrument.
Features external calibration.
Large measuring range suitable for most materials.
Piezo-electric pick-up stylus for external surface.
(Note: When ordering this unit please specify UK/Euro Charger units).

Technical data and characteristics:
Dynamic display during testing, sound signal start-test-ready, auto-off 90 sec, back-light LCD.
Roughness parameters: Rz and Ra.
Measuring range: Rz 0.10-50 um/Ra 0.05-15.0 um.
Cut-off lengths: 0.25mm, 0.8mm, 2.5mm.
Tracing length: 6mm.
Tracing speed: 1mm/sec.
Admissible temperature range: 0-40C.
Power supply: 3.0 V/Li-ion batteries/low battery indication.
Dimensions and weight: 102mm x 70mm x 22mm - Weight 180g.
Charger: 9V DC.
Min. curvature of cylindrical surface 40mm diameter (V-grooved base).
Ra and Rz:
Rz is the mean of all of the maximum peak to valley heights, from each sampling length, within the assessment length.
Ra is the universal recognised and most used international parameter of roughness.
It is the arithmetic mean of the absolute departures of the roughness profile from the mean line.
(Note: UK/Euro Charger units not supplied with surface roughness tester - see above).

Micrometer Heads

Standard end, spherical end & reverse reading.
Accuracy:
Metric: ±2µm. Graduation: 0.01mm.
Imperial: ±0.0001". Graduation: 0.001".

Series 148

Petri Dish, 55mm, Contact Plate

Ideal for use in routine hygiene monitoring of surfaces Concave profile of the dish raises the profile of the media when set giving better contact between the agar bed and surface under test. 25cm2 surface area - conforms to both the Institute of Environmental Sciences (IES, 1993)and the International Pharmaceutical Federation (I.P.F., 1990) Standards. Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination. Triple vented - aids gaseous exchange. Numbered grid on the base - facilitates colony counting. Deep skirted base - aids stability when stacked. Sterility: (AS) Aseptic Manufacture.

Pyrex Media-lab Bottles

Bottles complete with cap and pouring ring. Complies with ISO 4796. Ideal for mixing and storage of culture medium. Wide neck for easy filling. Sloping shoulders for smooth pouring action. White graduations and marking spot. Manufactured from temperature and chemically resistant borosilicate glass. Supplied with light blue coloured polypropylene cap. Neck fitted with pouring ring for drip-free performance. Withstands steam sterilisation or dry heat up to 140C. Never autoclave bottles with a fully tightened screwcap. Always slacken off. Failure to follow this procedure can lead to breakage of the bottle.

Available in 25ml*, 50ml, 100ml, 250ml, 500ml and 1000ml capacities, in singles or in packs of 10. Other sizes on request.

*This small bottle features a glass lip and does not require a pouring ring.