Grade 1-For inspection use

Manufactured to BS EN ISO 3650. Available in two grades.

Pocket Type - 32mm Diameter Face

9.5mm body for narrow lands between shoulders or in a bore. With jewelled bearings and precision miniature pivot bearings for almost friction free movement of the contact point. Contact point is reversible by lever allowing measurement of the top or bottom surface of any workpiece. Bezel and dial are adjustable.

Series 513

Grade 2-For workshop use.

Manufactured to BS EN ISO 3650. Available in two grades.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

BSF - Medium Class Tolerance

Screw Thread Micrometer

Interchangeable V-anvils allow various pitches to be measured with a single micrometer. With ratchet stop. Accuracy: 0-75mm /-4 mu m, 75-100mm /-5 mu m. Anvils supplied separately.

126 Series

Mechanical Digital Micrometers

With drop forged steel frame, micro-lapped Tungsten Carbide tipped measuring faces and constant force ratchet. Accuracy: 0-75mm /- 2 mu m, 75-150mm /- 3 mu m. Flatness: 0.6 mu m for up to 300mm. Parallelism: (2L/100) mu m (fraction rounded down). Counter to 0.01mm (.001"). Vernier scale graduated to 0.001mm (.0001").
L maximum measuring length

Series 193

Metric

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

Metric Coarse - Class 6H Tolerance

Pipette Tips

Manufactured from virgin polypropylene and metal-free pigments. High translucency for excellent visibility of sample. Hydrophobic surface to minimise fluid retention. Precision moulded for clean delivery. Non-sterile and autoclavable at 121C. Available bulk packed, an economical choice for the busy laboratory, or as rack packed refills for ease of handling. Sterility: (NS) Non sterile.

Other sizes available on request.

Professional Inspection Loupes

For inspecting material surfaces and fine markings.
Clear transparent base allows ambient light to
illuminate the material clearly.

Mitutoyo Universal Bevel Protractor

Series 187
High-precision angle gauge for accurate measurement of machines, moulds and jigs.
For use as a reference for assembling and machining.
Minimum reading: 5min.

Series 187

Type: 300mm/12"