Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

57.4mm Diameter Face

Peak Retaining Type With Limit Hands

Series 2

Azlon PP Printed Graduation Measuring Cylinders

Clear, pin sharp blue graduations. Conforms to class B tolerances. Ultra clear polypropylene, with good chemical resistance. Large pouring spout for easy dispensing. Stable hexagonal bases with non slip anti-suction feature. Easy to read as liquids have virtually no meniscus in plastic cylinders.

Available in 25ml, 50ml, 100ml and 500ml capacities. Other sizes on request.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

UNEF - Class 2B Tolerance

Scaled Eye Loupe

Battery powered, for use in poorly lit areas. Fitted with a removable viewing scale, with a range of plus/minus 10mm with 0.1mm graduations. The eye loupe viewer has a clear base and can be totally detached from the battery and light unit to be used without the aid of artificial light. Textured non-slip body.

Supplied with a hanging loop, cleaning tissue and protective case. Width: 36mm.

Grade 1-For inspection use

Manufactured to BS EN ISO 3650. Available in two grades.

Infrared Thermometer

Designed with on-the-job needs in mind, Fluke 62 MAX and 62 MAX+ infrared thermometers are everything you’d expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance.

Specifications:
Temperature Range: -30 °C to 500 °C (-22 °F to 932 °F)
Accuracy: ±1.5 °C or ±1.5% of reading, whichever is greater
-10 °C to 0 °C: ±2.0
-30 °C to -10 °C: ±3.0
Response Time: <500 ms (95% of reading)
Spectral Response: 8 to 14 microns
Emissivity 0.10 to 1.00
Optical Resolution: 10:1 (calculated at 90% energy)
Repeatability of Readings: ±0.8% of reading or <±1.0 °C (2 °F), whichever is greater
Battery: AA x1
Battery Life: 10 hours with laser and backlight on

Physical Specifications:
Weight: 255g
Size: 175 x 85 x 75mm
Operating Temperature: 0°C to 50°C (32°F to 122°F)
IP Rating: IP 4 per IEC 60529
EMC: EN 61326-1:2006 EN 61326-2:2006
Compliance: EN/IEC 61010-1: 2001
Laser Safety: FDA and EN 60825-1 Class II

62 Max Infrared Thermometer

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

BSPF - Medium Class Tolerance

Grade 2-For workshop use.

Manufactured to BS EN ISO 3650. Available in two grades.

2/3 Point Micrometers - Digital

Range of metric/imperial digital internal micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Models measuring 12.5mm and above are supplied with carbide and blind bore measuring anvils. Units below 6mm capacity are 2 point all other units are 3 point. Features include:Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.)Accuracy: Units between 1-20mm: 0.003mm. Units between 20-100mm: 0.004mm. Units between 100-200mm: 0.005mm. Units between 200-300mm: 0.006mm.

Individual units

Supplied with: Digital display unit, head and setting ring.