Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Oxford Height Gauges

Designed for accurate marking out and taking precise measurements.
Measuring head positioned on sturdy twin columns providing highly repeatable height measurements and stability.
Easy reading with dual directional negative and positive reading mechanical digital counters.
Rotating dial face.
Independently set the counters, to zero at any position.
Large feed wheel for rapid and precise adjustment.
Tungsten carbide tipped scriber for accurate marking out.
Manufactured from durable stainless steel.

Azlon Wide Neck Vented Wash Bottles

Labelled wide neck wash bottles featuring the patented Driplok vapour venting valve that prevents hazardous volatile solvent drips. Indelibly printed with a choice of a custom or two solvent labels all including full hazard symbols, safety information and instructions for use. Fitted with colour coded one-piece PP closures that maintain their shape in use. Closures feature precision jet-tip aperture for fine control. Bottles feature SPI recycling codes and volume information on their base. Custom/DIY version solvent bottles are also available with the Driplok valve. These are supplied with write-on areas for own solvent labeling and a supply of adhesive hazard symbols.

Available in capacities: 250ml and 500ml.

100mm Extension Rod

Metric 2.5 x 5mm thread for use with Metric Indicators, and Series 7 Depth Gauges. Steel.

Plunger Type Dial Test Indicators

Precision plunger dial indicators are suitable for various applications in the workshop or inspection department. All units are supplied with 8mm stems, 3mm diameter carbide ball anvil and standard offset lug backplate.
Accuracy: resolution down to 0.001mm. Calibration certificate supplied with all indicators reading better than 0.1mm.

FM-4 Graduated 0.002mm, 5mm travel, duel scale 0-20/ 0-10-0.

FM/FI Series

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

Metric Coarse - Class Tolerance 6G

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

BA - Medium Class Tolerance

Kennedy® Dial Calipers

Rack covers prevent dust from fouling teeth of racks. All measuring faces are precision ground and micro lapped for absolute inside, outside, depth and step readings.
Manufactured to DIN 862.
Range: 150mm.
Graduation: .05mm.
Weight 320g.

150mm Dial Caliper

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

Metric Fine - Class 6H Tolerance

Blade Micrometers - Satin Chrome Finished Frame

For the measurement of narrow grooves in forming tools, shaft diameters, keyways, splines, etc. The spindle is non-rotating, the anvils hardened and precision lapped. Made of forged steel the frame is fitted with heat plates. The sleeve and thimble are satin finished. Blade thickness: 0.030" (0.75mm). Measuring Depth: 0.25" (6.5mm). Parallelism: 0.00012"/3mm up to 2"/50mm. (3L/100)mm, (0.000120.00004L/4)" for models over 2"/50mm. Graduation: 0.0001" (0.01mm). Blade dimensions: a: 0.256" (6.5mm), b: 0.236" (6mm), c: 0.030" (0.75mm). Accuracy: /-3mm for up to 75mm, /-4mm for 75-100mm

122 Series

Accuracy:
3mm for up to 75mm.
4mm for 75 - 100mm.