Grade 1-For inspection use

Manufactured to BS EN ISO 3650. Available in two grades.

Petri Dish, 55mm, Contact Plate

Ideal for use in routine hygiene monitoring of surfaces Concave profile of the dish raises the profile of the media when set giving better contact between the agar bed and surface under test. 25cm2 surface area - conforms to both the Institute of Environmental Sciences (IES, 1993)and the International Pharmaceutical Federation (I.P.F., 1990) Standards. Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination. Triple vented - aids gaseous exchange. Numbered grid on the base - facilitates colony counting. Deep skirted base - aids stability when stacked. Sterility: (AS) Aseptic Manufacture.

Kennedy® Dial Gauge Accessories

Crystal dial for plunger type gauge.

Mitutoyo Interchangeable Rod Depth Micrometers

The interchangeable rod depth micrometer is available as standard mechanical, mechanical digital and electronic digimatic (see separate digimatic entry). All models have hardened tool steel bases. Measuring rods are ground and micro-lapped on the faces. The sleeve and thimble are satin-chrome finished. Rod diameters are .157" (4mm) and are adjustable in either direction for calibration and wear compensation. Accuracy: Rod Diameter: 4mm. Measuring length per rod: 1" (25mm). Instrument Error: /-3mm. Flatness of reference face (bottom face of base)1.3mm for 60mm/2.5"base. 2mm for 100mm/4"base.

129 Series

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

BSW - Medium Class Tolerance

3-Point Bore Micrometer Sets - Analogue

Economical range of mechanical two and three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring heads and setting rings are UKAS calibrated (6-200mm range only).

Azlon Narrow Neck PP Bottles With Caps

Translucent, rigid and leak-proof HDPE bottles with PP screw caps. Lightweight, but very durable in use. Ideal for a wide range of liquid storage and sampling applications. Excellent general chemical resistance. Moulded SPI recycling codes and volume information on bottle base. Singles supplied capped in shrink-wrapped packs.

Available in capacities: 60ml, 100ml, 125ml, 150ml and 500ml, as singles or in packs of 10.

Moore & Wright Depth Gauge Micrometers - Mechanical

Comply with BS6468.

892 Series

Interchangeable depth rods, 4mm diameter.

Portable Hardness Tester - Webster Type

The WEBSTER Hardness Testers are portable instruments that can perform on-site hardness testing on aluminium alloys, brass, copper and soft steel. A quick and easy test, the hardness value can be read out directly from the indicator with a simple clamp. Suitable for testing aluminium alloy profiles, tubings and sheet materials. Especially suitable for fast, non destructive quality inspection on the production site.

Features
• One hand operation and portability
• Variety of anvils permits testing a great variance of shapes
• Simple operation permits readings independent of the operator’s skill
• Test is made by simply applying pressure to the handles until" bottom" is felt
• Easy-to-read dial indicator with 20 graduations permits use of the tester as "go" and "no-go" gauge
• Standard hardness gauge tests materials up to 13mm in thickness



Material: Aluminium Alloy
Hardness range: 25-110HRE/58-131HV
Workpiece: Thickness: 6mm Max. Diameter: 10mm Min.
Measuring scope:0-20HW
Accuracy: 0.5HW
Weight: 0.5kg