External Micrometers - Mechanical

All have tungsten carbide measuring faces with a choice of standard or vernier type sleeve. Fitted with a 6.8mm spindle diameter, speeder type ratchet and locking lever. Supplied with an adjusting key.
Comply with BS870, DIN863/1, ISO361.

Series 1966 - Metric

Blue textured tapered bow frame. Supplied in a durable plastic pocket case.

Graduation: 0.01mm.

External Micrometers - Mechanical

All have tungsten carbide measuring faces with a choice of standard or vernier type sleeve. Fitted with a 6.8mm spindle diameter, speeder type ratchet and locking lever. Supplied with an adjusting key.
Comply with BS870, DIN863/1, ISO361.

Series 1966 - Inch

Blue textured tapered bow frame. Supplied in a durable plastic pocket case.

Graduation: 0.001".

External Micrometers - Mechanical

All have tungsten carbide measuring faces with a choice of standard or vernier type sleeve. Fitted with a 6.8mm spindle diameter, speeder type ratchet and locking lever. Supplied with an adjusting key.
Comply with BS870, DIN863/1, ISO361.

Series 1966 - Inch

Blue textured tapered bow frame. Supplied in a durable plastic pocket case.

Graduation: 0.001".

Moore & Wright Depth Gauge Micrometers - Mechanical

Comply with BS6468.

891 Series

Interchangeable depth rods, 4mm diameter.

External Micrometers - Mechanical

All have hardened steel or tungsten carbide measuring faces with a choice of standard or vernier type sleeve. Fitted with a 6.8mm spindle diameter, speeder type ratchet and locking lever. Supplied with an adjusting key. Comply with BS870, DIN863/1, ISO361

965 Series

Tungsten carbide. Blue textured tapered bow frame. Supplied in a durable plastic pocket case.

Micrometer Ball Attachments

To suit the 1961, 1965 and 1966 series micrometers. Can be fitted to the anvil or spindle on external micrometers to enable round or irregular surfaces to be measured. The ball is hardened and moves freely to allow contact with the object being measured. Note: Always deduct the ball diameter from every reading.

Moore & Wright Basic Line Digital Caliper

MW110-15DBL
Capacity: 0-150mm/6".
Resolution: 0.01mm/0.0005".
Jaw length: 40mm.

Features:
Standard Digitronic caliper.
On/off switch.
Zero point at any position.
Displays values in mm and inch.
All metal parts made of hardened stainless steel.
CR2032 battery.
Complies with DIN862.

Moore & Wright Digitronic Depth Caliper

MW17030DB:
Range: 0-300mm/12".
Resolution: 0.01mm/0.0005".

Features:
Top quality digital depth caliper.
Modern design.
Large 7.5mm character height digital display.
Long life guaranteed.
Ground micro-lapped measuring surfaces.
Functions: mm/inch conversion, on/off, data-output, zero setting, battery low indication.

Moore & Wright Depth Gauge Micrometers - Mechanical

Comply with BS6468.

892 Series

Interchangeable depth rods, 4mm diameter.

Moore & Wright Engineers' Mini Level

Ultra compact dimensions and a single vial. Machined from a solid block of carbon steel.