Moore & Wright Digitronic Internal Calipers

MW432-05DC:
Range: 40-50mm/1.6-2.0".

Features:
Large LCD display.
0.01mm or 0.0005" resolution.
Preset capability.
Direct Inch/Metric conversion.
Absolute/Incremental measurements.

Outside Micrometer

Tungsten Carbide measuring faces with tapered bow frame. Frame is cut away at the anvil end to facilitate usage in narrow slots. Complete with ratchet, locking lever and supplied in a plastic case.
Range: 0 - 1??.
Graduation: 0.001??.

Moore & Wright Digitronic Internal Calipers

MW432-01DC:
Range: 5-15mm/0.2-0.6".

Features:
Large LCD display.
0.01mm or 0.0005" resolution.
Preset capability.
Direct Inch/Metric conversion.
Absolute/Incremental measurements.

External Micrometers - Mechanical

All have tungsten carbide measuring faces with a choice of standard or vernier type sleeve. Fitted with a 6.8mm spindle diameter, speeder type ratchet and locking lever. Supplied with an adjusting key.
Comply with BS870, DIN863/1, ISO361.

Series 1966 - Metric

Blue textured tapered bow frame. Supplied in a durable plastic pocket case.

Graduation: 0.01mm.

Dial Calipers - Plastic

Manufactured from glass reinforced material. /-0.1mm//-0.004" accuracy.

Moore & Wright Combination Sets - Accessories

Accessories and spares for use in conjunction with Moore & Wright Combination Sets CSM300 Metric and CSME12 Metric/Inch.

Centre Head

Moore & Wright CSME12 Metric/Inch Combination Set

Fully hardened and tempered precision rule etched on both sides for easy reading and longer life. Protractor has a full satin chrome 360 scale plate, graduated 0 - 180 - 0. Square head offers fixed angles of 15, 30, 45, 60, 75 & 90 and the centre head has a fixed 90 angle for finding the centre of round bar stock up to 120mm diameter. Contents: 300mm/12" rule, protractor, square and centre head.

External Micrometers - Mechanical

All have tungsten carbide measuring faces with a choice of standard or vernier type sleeve. Fitted with a 6.8mm spindle diameter, speeder type ratchet and locking lever. Supplied with an adjusting key.
Comply with BS870, DIN863/1, ISO361.

Series 1966 - Inch

Blue textured tapered bow frame. Supplied in a durable plastic pocket case.

Graduation: 0.001".

External Micrometers - Mechanical

All have tungsten carbide measuring faces with a choice of standard or vernier type sleeve. Fitted with a 6.8mm spindle diameter, speeder type ratchet and locking lever. Supplied with an adjusting key.
Comply with BS870, DIN863/1, ISO361.

Series 1966 - Metric

Blue textured tapered bow frame. Supplied in a durable plastic pocket case.

Graduation: 0.01mm.

MTR110 Surface Roughness Tester

The Moore & Wright Surfmatic MTR110 is a pocket sized surface roughness measuring instrument ideally suited to rapid on-the-spot surface measurements.

Features:
Back-light LCD.
Dynamic Test Display: progress of cut-off length during testing.
Li-ion rechargeable batteries.
Protection slide on pick-up.
Auto-off after 90 seconds.
Pocket-size and economically priced.
Both Ra and Rz parameters in one instrument.
Features external calibration.
Large measuring range suitable for most materials.
Piezo-electric pick-up stylus for external surface.
(Note: When ordering this unit please specify UK/Euro Charger units).

Technical data and characteristics:
Dynamic display during testing, sound signal start-test-ready, auto-off 90 sec, back-light LCD.
Roughness parameters: Rz and Ra.
Measuring range: Rz 0.10-50 um/Ra 0.05-15.0 um.
Cut-off lengths: 0.25mm, 0.8mm, 2.5mm.
Tracing length: 6mm.
Tracing speed: 1mm/sec.
Admissible temperature range: 0-40C.
Power supply: 3.0 V/Li-ion batteries/low battery indication.
Dimensions and weight: 102mm x 70mm x 22mm - Weight 180g.
Charger: 9V DC.
Min. curvature of cylindrical surface 40mm diameter (V-grooved base).
Ra and Rz:
Rz is the mean of all of the maximum peak to valley heights, from each sampling length, within the assessment length.
Ra is the universal recognised and most used international parameter of roughness.
It is the arithmetic mean of the absolute departures of the roughness profile from the mean line.
(Note: UK/Euro Charger units not supplied with surface roughness tester - see above).