Nut Splitters

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Kennedy 10 Tonne Body Repair Kit

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case. Strong flexible hose with spring guards at both ends. Hydraulic hand pump, ram and spreader.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B1246
Maximum load: 12 Metric Tonnes.
Height range: 230-465mm Min/Max.
Max saddle adjustment: 80mm.
Weight: 7.50kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Spares

To suit hand pumps

Repair kit

Kennedy Spring Compressor Set

Hardened steel screws & cast steel claws. 2 legged. Central hexagonal drive with wrap over coil claws. Can be reversed for spreading applications. Use with 21mm (3/16") AF spanner. Maximum jaw opening: 250mm.

Repair Kit for Kennedy Hydraulic Pull Ram

Contains replacement O-ring seals for KEN-503-7180K.



To suit the the Kennedy Hydraulic Pull Ram (KEN-503-7180K) illustrated.

Spot Weld Remover

Suitable for cutting holes in steel metal, steel, plastic and brass. The hardened steel cutter is reversible increasing tool life. adjusting the spring loaded centre point, screw accurately controls the depth of cut. Allowing the top to be removed whilst leaving the lower panel in place. Maximum rated operating speed 900rpm.

Creeper Board with Magnetic Trays

High-impact moulded plastic creeper board let’s you work under vehicles with ease. Low profile design to provide greater clearance. Padded headrest with removable magnetic tool trays and 6 x75mm PVC coated caster wheels. Capacity: 113kg (250lbs). Dimensions: 1020(L) x 475(W) x 120(H)mm. Weight: 5kg.

KMC01

55 - 175mm Valve Spring Compressor

Fully adjustable valve spring compressor for use on multi-valve petrol and diesel engines with deep seated valves. Universal model with unique dual-cam action, parallel lift and automatic locking reversible jaw/adaptor, suitable for general use on a wide range of OHC, OHV and CVH engines. A unique 'direct action' compressor lever gives improved visibility and ease of use in areas of difficult access. Manufactured from heavy duty steel with all riveted joints and a slip resistant rubber handles.
Specifications:
Restricted access adaptors: 25mm, 30mm.
Jaw opening: min 55mm, max 175mm.
Throat clearance: 165mm.

Packaging dimensions (W x H x D): 430 x 205 x 40mm.

Gross weight: 2.2kg.

Cylinder Hone

For honing of brake cylinders and piston bores with capacities between 19 - 68mm. Self aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all three jaw chucks. Supplied complete with a fine grade stone set. Overall length 200mm.
For storage purpose legs are retained in position by a triangular clip. This can be removed using long nose pliers. or tweezers and should be retained for futher use. Replacement stone sets available.

Use brake fluid for cutting lubricant.

Packaging dimensions (W x H x D): 70 x 297 x 30mm.

Gross weight: 105g.