Kennedy Fuel Container

Manufactured from heavy gauge steel with an epoxy coated finish. Supplied with a vented polyethylene pouring spout. Suitable for storage and transportation of petroleum spirit.
Tested to DIN 7274 complies with UN Class 3.

Steel Fuel Can

Cooling System & Radiator Cap Pressure Tester

Designed for the pressure testing of cooling systems and radiator caps up to 35psi (2.5bar). Suitable for use on most makes of car and commercial vehicles, including: Mercedes, Ford, Chrysler, Peugeot, Honda, Lexus, Mazda, Suzuki, Toyota, Nissan, Opel, Volkswagen, Saab, Volvo, Audi, Citroen, Fiat and BMW.
Contents: 14 radiator pressure testing caps, for use in testing cooling systems for leaks. Two cap adaptors, sizes 2-3 and 4-5, for testing radiator cap release pressure and seal condition. Two 200psi coolant hoses (5/16" and 3/8"), for use with T-adaptor for in-line pressure testing. T-adaptor for creating in-line pressure testing set-up. Two 3/4" hose clips.

Body Repair Kit Spares

Spares for hydraulic hand pumps



For Collision Repair Kit

Piston Ring Pliers

To enable fast Installation or removal of piston rings. A self-adjusting spring tensioned mechanism manufactured from nickel-plated steel with PVC handles for extra grip.
Capacity: 50 - 100mm (2" - 4")

Oil Filter Cap Wrench Set - 7 piece

Cap type filter wrenches manufactured from Chrome Vanadium with a Satin Finish.
Use with 3/8” or 1/2” Sq drive wrenches to
remove paper cartridge style oil filters commonly
fitted to vehicles including Vauxhall, Mercedes
and Volkswagon.

Contents: - 24, 27, 30, 32, 36, 38mm &
1/2” - 3/8” Adaptor.

Kennedy Low Profile Long Reach Trolley Jacks

Kennedy Low Profile Long Reach Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Kennedy 2 Tonne Low Profile Long Reach Trolley Jack

Kennedy 2 Tonne Low Profile Long Reach Trolley Jack has a strong, robust steel chassis to provide stability when under load. A low entry height of 76mm. Heavy duty fixed direction casters, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle.

Model number: T510L
Maximum load: 2 tonnes
Dimensions (L x W x H: 1006 x 365 x 136mm)
Minimum height: 76mm
Maximum height: 510mm
Weight: 42kg

(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Cylinder Hone

For honing of brake cylinders and piston bores with capacities between 19 - 68mm. Self aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all three jaw chucks. Supplied complete with a fine grade stone set. Overall length 200mm.
For storage purpose legs are retained in position by a triangular clip. This can be removed using long nose pliers. or tweezers and should be retained for futher use. Replacement stone sets available.

Use brake fluid for cutting lubricant.

Packaging dimensions (W x H x D): 70 x 297 x 30mm.

Gross weight: 105g.

Nut Splitters

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Kennedy Automotive Service Tools

The Kennedy three legged oil filter wrench has a geared mechanism that multiples the torque applied when removing or tightening filters, the legs self adjust to the diameter of the filter to ensure a positive grip.

Features include:
3/8" Square drive - for use with ratchet handles, extension bars, flexible drives, etc.
With hexagon adaptor - for use with 19mm/3/4" AF spanners or sockets.
All steel construction chrome plated.
Milled teeth on gripping arms for a more positive grip.

FWL120 Three Legged Oil Filter Wrench

FWL120 wrench:
Opening Capacity: 60 to 120mm diameter.
Drive: 3/8” with ratchet handle or 19mm (3/4”) AF spanner.

Body Repair Kit Spares

Spares for hydraulic hand pumps

Double Ended Male Snap Connector

For Collision Repair Kit