Kennedy Specialist Automotive Tools

For the removal of diesel injection pumps from the following engines:

BMW M47/57 Engines.

DPP020 Diesel Injection Pump Puller

Hydraulic Ram

Rugged construction with a heavy duty return spring. Chrome plated piston inhibits rusting.

Push type

10 Ton capacity.
For use with 33mm diameter accessories.
243cc oil capacity.
15cm (6&34;) stroke.
1/4" NPT thread size.
Accessories easily snap on.

Right Hand Brake Piston Wind-back Tool Kit - 12 Piece

Winds back disc brake calipers when replacing brake pads. Professional quality, allows the easy return of brake piston into the caliper.

Suitable for most braking systems including Alfa Romeo, Audi 80/90/V8, BMW, Citroen XM & Xantia, Ford, General Motors, Jaguar, Mazda 323, Mercedes Benz, Mitsubishi, Nissan, Rover, Saab 900, Toyota, Volkswagen, Volvo.

Packaging dimensions (W x H x D): 350 x 305 x 80mm .

Gross weight: 1.5kg.

Piston Ring Compressor

The compressor gently compresses the piston rings into position reducing the risk of damage to components during installation. Key operated with ratchet mechanism and safety valve for combining safe rapid compression with positive control. Suitable for passenger car vehicle engines. Made from tempered spring steel complete with steel key.
Capacity: 57mm - 125mm (2.1/4" - 5")
Height: 80mm (3.1/4")

Kennedy Tyre Pressure Gauges

In the interests of safety, tyre pressures should be checked at least once a week when the tyres are cold. This is because manufacturers" recommended pressures are based on cold tyre readings.

Deluxe Type Tyre Pressure Gauge

This pressure gauge has a long body, ideal for use on cars, vans, lorries, plant and equipment etc. It is very robust in construction and has a maximum pressure reading of 120psi.

Kennedy Roof Bars

Easy to fit bars, no extra tools required. Manufactured from coated aluminium, complete with adjustable rubber faced foot packs. Designed to fit on to original car manufacturers roof rails. Maximum load 80kg, minimum spread 900mm, maximum spread 1100mm. Locking keys included. Supplied in pairs.

RRB110

Body Repair Kit Spares

Spares for hydraulic hand pumps

Extension Tubes

Small Extension Tube for collision repair kits

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B2045
Maximum load: 20 Metric Tonnes.
Height range: 242 to 452mm Min/Max.
Max saddle adjustment: 60mm.
Weight: 11.20kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Kennedy Timing Lights

For checking and setting ignition timing on automotive, agricultural and marine engines. For use on 12V systems. Reverse polarity protected. Accurate to 8,000rpm. 135cm long durable power leads. Impact resistant housing. On/off trigger switch. Bright linear Xenon flash tube for daylight use. Focused lens provides concentrated light. Easy to apply inductive impulse pick-up.

Standard Timing Light

Viscous Hub Spanners

For the removal of thermo, viscous fan hubs. Cranked for easy access. Suitable for most makes of car.