Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B541
Maximum load: 5 Metric Tonnes.
Height range: 216 to 416mm Min/Max.
Max saddle adjustment: 70mm.
Weight: 4.90kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Kennedy Universal Ball Joint Remover

Manufactured from drop forged alloy steel with slim tapered fork jaw for easier access into confined areas. Suitable for use on most car and light commercial vehicle ball joints.

Panel Beating Dolly

Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish.

Utility Dolly

Double side multi-purpose, use the edge most suited to the size and shape of a damaged flange.

Non Approved Fuel Containers

Durable polyethylene containers. Diesel, petrol, chemical and oil resistant. Integral rigid dispensing spout.

Piston Ring Pliers

To enable fast Installation or removal of piston rings. A self-adjusting spring tensioned mechanism manufactured from nickel-plated steel with PVC handles for extra grip.
Capacity: 50 - 100mm (2" - 4")

Kennedy Ratcheting Axle Stands

Suitable for supporting raised vehicles or equipment. Wide angled base, stamped and welded steel frame with solid steel control lever & protective red enamel coating. 10-position ratchet design that automatically locks when raised. Sold as pairs.

3 Tonnes Ratcheting Axle Stands (Pair)

3 Tonnes safe working load per stand (6 tonnes per pair).

Brake Pedal Depressor

Ingenious tool for depressing and holding down the brake pedal whilst carrying out maintenance.

Kennedy Inspection Lamp with Li-ion Battery

Ideal for use in engine bays and other low light work areas. Main light and spotlight option. Main light lasts up to 2 hours when fully charged. Convenient grip mounted ON/OFF switch. Durable and robust construction. High light output. Sturdy swivel hanging hook. Anti-roll hexagonal shape. Rubber handle and end cup. Supplied with mains charger.

ILR365 - 65 LED Inspection Lamp (Rechargeable Li-ion Battery)

Model number: ILR365
Order code: KEN-503-5080K
LED intensity at 50cm (main light): 1,600Lux
LED intensity at 50cm (spotlight): 200Lux
Charging time: 5hrs
Operating time (main light): 2hrs
Operating time (spotlight): 20hrs
Charger input: 230V ~ 50Hz
Charger output: 5.4V DC 600mAh
Operating voltage: 3.7V
Operating temperature: 0C to 40C
Battery: Li-ion 2,000mAh
Moisture protection (Inspection Lamp only): IP20
Net weight (Inspection Lamp only): 410g

Kennedy Fuel Container

Suitable for transporting and storing petrol, diesel and motor oil. With lever type safety sealing cap and integral carrying handle. Painted inside and out.

10 Litre Heavy Duty Steel Jerry Can (Green)

The 10ltr capacity Jerry Can from Kennedy is manufactured from 16swg steel with fuel resistant lining. A unique wide channel breather helps ensure that when you pour fuel out of the Kennedy Jerry Can it pours as smoothly as possible to reduce spillages. The leak-proof bayonet lid closure allows storage of the can in any position and is additionally secured in position with a locking pin to prevent accidental opening.

UN Approved Class 3. Conform to DIN 7274. GS TUV approved.

Flexible pouring spout available seperately (KEN-503-9300K).

T-Handle Circlip Tool

Fully adjustable internal and external Circlip tool. Manufactured from hardened steel fitted with T-handle to give smooth precise control. 70mm capacity, ideal for use on commercial vehicles.
Supplied with .090?, .118?, .150?
and .170? interchangeable tips.
Overall length: 310mm.