Spark Plug Brushes

Set of three: nylon, brass and stainless steel.

Kennedy Automotive Repair Tools

Kennedy curved hook tools are for inserting and removing rubber seals and gaskets, they feature a long shaft and curved head for smooth operation in both directions.

Manufactured from hardened and tempered chrome vanadium steel with a comfort grip.

Available in two sizes.
230mm length Order Code: KEN-503-8760K
295mm length Order Code: KEN-503-8770K

Automotive Curved Hook Tools

Body Repair Kit Spares

Spares for hydraulic hand pumps

Double Ended Male Snap Connector

For Collision Repair Kit

Viscous Hub Spanners

For the removal of thermo, viscous fan hubs. Cranked for easy access. Suitable for most makes of car.

Kennedy Bottle and Trolley Jacks

The Kennedy T349 Instant lift 3 tonne trolley jack is capable in one stroke of the foot pedal of raising the 120mm dia load saddle, up to the jack point of the vehicle prior to lifting, this saves time. The frame of the T349 is constructed from heavy gauge steel with heavy-duty castors (swivel type at rear) to ensure that the trolley jack is stable under load. Automatic safety overload protection. Supplied with two-piece 1mtr handle.

GS and TUV approved.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

2 Tonne Quick Lift Trolley Jack

Model number: T349 Instant Lift.
Maximum load: 3 tonne.
Dimensions (L x W x H): 680 x 340 x 170mm.
Minimum height: 145mm.
Maximum height: 490mm.


(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

Nut Splitters

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Kennedy Ratcheting Axle Stands

Suitable for supporting raised vehicles or equipment. Wide angled base, stamped and welded steel frame with solid steel control lever & protective red enamel coating. 10-position ratchet design that automatically locks when raised. Sold as pairs.

3 Tonnes Ratcheting Axle Stands (Pair)

3 Tonnes safe working load per stand (6 tonnes per pair).

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B2045
Maximum load: 20 Metric Tonnes.
Height range: 242 to 452mm Min/Max.
Max saddle adjustment: 60mm.
Weight: 11.20kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Kennedy Fuel Container

Manufactured from heavy gauge steel with an epoxy coated finish. Supplied with a vented polyethylene pouring spout. Suitable for storage and transportation of petroleum spirit.
Tested to DIN 7274 complies with UN Class 3.

Steel Fuel Can

Kennedy Automotive Tyre Pump

The Kennedy ACP300 air compressor tyre inflator is easy to use just plug into your car cigarette lighter for power; slip the universal adaptor over the tyre valve, lock in place with the thumb latch and you are ready to inflate, the pressure is clearly displayed on the integral air pressure gauge. Suitable for inflating tyres, airbeds, boats and sports equipment fast and easily.

ACP300 12V Portable Mini Air Pump

The Kennedy ACP300 air compressor tyre inflator is supplied with a 3m cable, a 12V car cigarette lighter plug, 600mm air hose, 3 interchangeable adaptor nozzles and adaptors. The dual air pressure gauge can be read in both lb/in2 & kg/cm2.

Caution: Use with care. Do not exceed recommended pressure at any time or leave unattended while the unit is running. Allow to cool down after 15 minutes of continuous operation. When inflating balls, air mattresses and other soft inflatable material items, etc. avoid excessive pressure. (Note: Soft inflatables may not have pressure ratings, these should only be inflated until they are firm to touch - do not over inflate.)