Brake Pad Key

8mm hexagon key. 140mm handle for optimum leverage and grip.
Suitable for disc brake caliper retaining bolts on many modern cars. Manufactured from chrome vanadium steel with corrosion-resistant phosphated finish.

Packaging dimensions(W x H x D): 134 x 193 x 20mm.

Gross weight: 245g.

Extra Long Circuit Tester 6 & 12V

Suitable for use with power on. For 6 & 12V automotive systems only. Locates shorts, earth & open circuits. Extra long probe length: 185mm 1.7m heavy duty lead with spring strain relief Super sharp tempered steel probe to test through wire insulation.



Super sharp tempered steel probe circuit tester to test through wire insulation when power is switched on. Tests 6 & 12V automotive systems only, locates earth, short and open circuits. Tester is fitted with a 1.7m heavy-duty lead with spring strain relief, 185mm probe and a heavy-duty transparent plastic handle.

Oxygen Sensor Socket

1/2" square drive, 22mm hex. x 90mm length. Cutaway section allows the socket to pass over wiring
Packaging dimensions (W x H x D): 72 x 158 x 30mm.
Gross weight: 238g.

Kennedy Fuel Container

Suitable for transporting and storing petrol, diesel and motor oil. With lever type safety sealing cap and integral carrying handle. Painted inside and out.

10 Litre Heavy Duty Steel Jerry Can (Green)

The 10ltr capacity Jerry Can from Kennedy is manufactured from 16swg steel with fuel resistant lining. A unique wide channel breather helps ensure that when you pour fuel out of the Kennedy Jerry Can it pours as smoothly as possible to reduce spillages. The leak-proof bayonet lid closure allows storage of the can in any position and is additionally secured in position with a locking pin to prevent accidental opening.

UN Approved Class 3. Conform to DIN 7274. GS TUV approved.

Flexible pouring spout available seperately (KEN-503-9300K).

Body Repair Kit

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case.
Strong flexible hose with spring guards at both ends.
Hydraulic hand pump, ram and spreader.

Spares

Blow Moulded Case for 4 Tonne Kit. N.B. contents not included.

Universal Trim Pad Remover

For removing plastic interior trim retaining studs
Corrosion resistant

Packaging Dimensions
84(W) x 259(H) x 30(D)mm

Gross Weight
135g

Kennedy Ratcheting Axle Stands

Suitable for supporting raised vehicles or equipment. Wide angled base, stamped and welded steel frame with solid steel control lever & protective red enamel coating. 10-position ratchet design that automatically locks when raised. Sold as pairs.

3 Tonnes Ratcheting Axle Stands (Pair)

3 Tonnes safe working load per stand (6 tonnes per pair).

Kennedy Tyre Pressure Gauges

In the interests of safety, tyre pressures should be checked at least once a week when the tyres are cold. This is because manufacturers" recommended pressures are based on cold tyre readings.

Deluxe Type Tyre Pressure Gauge

This pressure gauge has a long body, ideal for use on cars, vans, lorries, plant and equipment etc. It is very robust in construction and has a maximum pressure reading of 120psi.

Body Repair Kit Spares

Spares for hydraulic hand pumps



For Collision Repair Kit

Kennedy Automotive Repair Tools

Kennedy Windscreen wiper arm removal tool for removing stuck and stubborn taper fitting wiper arms.

Maximum opening: 27mm.
Collar size: 15mm.

Windscreen Wiper Arm Removal Tool