York? Diamond Coated Burrs

3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.

Cylindrical

Osaki™ Bench Grinders

The Osaki™ GB150-2 bench grinder has a smooth running powerful 250W motor, suitable for DIY & Hobby use.

Features include:
Spark deflectors/eye shields.
Adjustable work supports,
Supplied with a 36 Grit and 60 Grit wheel.
GB150-2 150mm (6") Bench Grinder

Specifications:
Motor input capacity: 250W.
Motor supply voltage: 230V-240V/50Hz.
No load speed: 2,950RPM.
Wheel size: 150x20x12.7mm.
Size inc. guards: 250x320x230mm (HxWxD).
Weight: 8kg.

FOR DIY USE, Not Warranted for Industrial Use.

What "Practical Classics" magazine say..."Best Budget Buy"

"The Osaki is the only grinder in this test to combine its motor casing and base in a single unit. This all-in-one approach may well have been a cost-saving measure, but it brings this bench-grinder a certain additional solidity. The bolt-on parts are all solid too – we particularly like the tough tool rests and their easy-to-adjust thumb screws. The 250W motor is equal to with the Best Buy for smoothness of running and it spins up to its 2,950rpm maximum unloaded speed in a couple of seconds. The motor proved to be quite stall-resistant, with only the drag of a large chisel capable of slowing the grinding wheel briefly. We don't hand out Best Budget Buy awards just because a workshop product is reasonably priced, it also has to perform well – and this Osaki does just that."

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 27 Multi-Power-Line General Purpose Metal Grinding

The Multi-Power-Line addresses jobs likely to be carried out on a regular basis. Both product ranges are Rasta product solutions and therefore of indisputable quality. For steel. High performance to wheel life ratio. General-purpose applications. Box quantity 10.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

DMT Diamond Whetstones

Made with real diamond (monocrystaline). Easy to use - requires only light pressure to produce a keen edge. Uses water as a lubricant. Can be used to hone and sharpen steel, ceramics, glass, tungsten carbide, stone, etc.

Mini-Sharp and Key Ring

Makita Random Orbital Sander

B05030
Smooth and fast sanding with 3.0 AMP motor. Large 1/8" random orbit action for fast and super smooth sanding. Pad control system for controlled pad speed upon start-up. Efficient through-the-pad dust collection system for a cleaner environment. Dust-sealed switch minimizes contamination. Rubberized grip for improved operator comfort and control. Uses quick change 5" (8-hole) hook-and-loop abrasive paper. Oversized sealed ball bearing construction for longer tool life. Double insulated.

Specifications:
Pad size: 123mm.
Orbits per minute: 12000rpm.
Orbit diameter: 2.8mm.
Input wattage: 300W.
Weight: 1.3kg.
Supplied with: cloth dust bags, hook and loop discs.

Available in 240V and 110V.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Kennedy® Defender - Uplight v2.

Stable, self-righting polypropylene base. Suitable for mounting on uneven ground (Illustrated with Defender uplight v2 stick lights - available separately).

Sand or Water Filled Base

3M Scotch-Brite? Clean ?n Strip? Discs

XT (premium) and CG (general-purpose) discs are made of tough Clean & Strip material. It is especially designed for those cleaning applications where product life and edge retention are particularly important.

Blue CG

Designed for paint, rust & coatings removal as well as surface preparation pre & post welding. A flexible disc that cleans faster and lasts longer than conventional black Clean ?n Strip discs.

Kennedy® Velcro-Backed Sanding Discs

No spanners required to change discs. 100% of sanding disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied again and again. Unaffected by dust or moisture. Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

Plain (No Holes)

Diameter: 150mm.