3M 618 Anti-loading Silicon Carbide Paper

Sharp silicon carbide mineral gives an aggressive cut with fine finish. Higher loading resistance means extended product life. For hand sanding or random orbital sanding on furniture, ornaments, frames, fillers, mouldings, profiles. Use on lacquers, plastics, primer coats, fillers, wood.
Mineral: Silicon Carbide.
Backing: A-weight Paper.
Coating: Open.
Bond: Resin.

Sheets

A flexible 'A' weight high performance silicon carbide sheet. Ideal for finishing paints and lacquers, wood and plastics. Size: (W)230mm x (L)280mm.

Engis Lapping Sticks

Length 150mm.

Hardwood

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® RCD Plug

Offer portable protection against electrocution, 240V.



The RCD plug should be wired directly to an appliance in place of the standard 3-pin 13 amp plug. (follow the wiring diagram supplied).

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W215. Grade: RA80. Diameter: 25mm. Length: 3mm. Max. rpm: 38,000. Weight per 10: 30g.

Norton Aluminium Oxide Sheets

In the same market-leading material as Norton's "Handy Roll", these high quality aluminium oxide sheets provide excellent flexibility. Ideal replacement for "Emery Cloth."

Sheets

Sheet size: (W)230mm x (L)280mm. Available in several grades.

Makita Battery Chargers for Cordless Tools

Chargers for Makita Li-Ion/NiMH/NiCD plug-in type batteries. Additional chargers used in conjunction with extra batteries also increase productivity, charging batteries while not in use. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing.

DC1439 Fast Battery Charger

NiMH/NiCd quick charger. 7.2 to 14.4V. 9 minute charge (1.3Ah battery).

York? Flexible Abrasives

Abrasive covered foam for general-purpose sanding on wood.

Sanding Blocks

Abrasive coated semi-flexible sponge, coated on all four surfaces. Suitable for sanding 90 contoured surfaces. Available in four different grades. Size: 96 x 69 x 25mm.

Kennedy® Tie Cord Bonnet Support Pads

High quality 23mm foam pads with rigid back plates. For use with all tie cord bonnets. Bonnets supplied separately. Max 2500rpm. (125mm and 150mm pads are dual purpose - also for use with Velcro bonnets or foams).

Bonnet diameters available: 125mm, 150mm, 180mm, and 200/225mm.
Thread sizes: M14 x 2 and 5/8" UNC.

Bosch Sabre Saw Blades

Bi-metal HSS milled side set blade.
Application: medium-thick sheet metal (2 - 8mm), closed pipes/profiles (dia. 10 - 100mm).
Length: 150mm.
Pitch: 1.8.
Product No. S918BF.

For Metal (Pack 5)