3M Roloc? Bristle Discs

Roloc bristle discs are ideal for removing paint, stains, adhesives, weld burns, rust, heavy oxides, and surface contaminants from large areas quickly and easily. Requiring minimal pressure from the operator and their maximum operating speed is suitable for most right angle tools.
The Roloc attachment system allows discs to be rapidly changed.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

777F Cloth Discs

High performance disc with ceramic Cubitron abrasive mineral for use on stainless steels.
Maximum rpm. 25mm discs = 25,000rpm.
38, 50 & 75mm discs = 20,000rpm.

3M Premium Cubitron™ Fibre Discs

985C
3M's premium blended Cubitron™ disc. Superior performance in all metal grinding applications. More aggressive cut and longer life than 3M 785C discs. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

178mm Diameter x 22mm Bore (Max 7,000rpm)

3M Whetstone

Professional Diamond Whetstones will give you a perfect edge on all your blades and tools. Used for precision faceting, sharpening chisels, blades, carbide tools, etc.

Diamond Whetstone

3M Scotch-Brite? Multi-Flex Sheets

These sheets provide a cost effective alternative to conventional cleaning and finishing products, such as wire wool, wire brushes, scrapers, blades and solvents. Pre-cut sheets on a roll are packed in a convienient centre pull dispenser pack.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 600A. 6 Hole.

Diameter: 150mm.

338U Plain Stikit™ Sheets

Abrasive C paper backed sheets with a special self adhesive system that ensures the product remains firmly in place whilst in use but is easy to apply and quick to remove. Ideal for intermediate and final sanding on lacquered hard and soft woods, paints lacquers, primers, solid surface materials and plastics.



Plain (no holes)

3M Stikit™ Discs 245

Stiff E-weight paper gives a strong backing and long product life. Resin bond resists heat to prevent premature "burning". For initial and intermediate sanding on solid wood furniture, wood and metal door frames and other hard and soft wood, plastic and metal surfaces.
Use on: Wood, Metal, Paints, Fillers, Plastics.
Mineral: Aluminium Oxide.
Backing: E Weight Paper.
Coating: Open.
Bond: Resin.

Plain (no holes)

Diameter: 150mm.

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

3M Red Paper Rolls

A very open coat "F" weight paper roll designed to minimize loading when used to sand soft resinous woods. Dimensions: (W)115mm x (L)50M. Several grades available.