Bosch Jigsaw Blades

Application: Soft ceramic wall tiles, glass fibre reinforced plastics, cast iron (5-10 mm), fine cut. Tungsten carbide coated. Effective length: 59mm. 50 grit.

Hard Metal Carbide Tipped For Special Applications (Pack 3)

Bosch Jigsaw Blades

Application: For tight curved cuts in hard & softwood, plywood chipboard 3-20mm. Plastic, perspex & insulating materials 2-20mm. Wavy set & milled teeth. Effective length: 50mm. Pitch: 2.0.

Carbon Steel For Wood & Plastics (Pack 5)

100mm (4") Angle Grinder

GWS 7-100
Particularly small grip circumference for safe, non-fatigue working. Good handling due to the flat gear head and switchable right or left side handle. Spindle lock for easy disc changes. Protective guard. Safety switch. Gear head can be rotated in 90 steps. Suitable for SDS quick-locking nut (special accessory). Comes with: Protective guard, 2-hole spanner, Auxiliary handle, Locking nut and Flange.

Rated power input: 720W.
No-load speed: 11.000rpm.
Grinding spindle thread: M10.
Disc diameter: 100mm.
Rubber sanding plate, diameter: 100mm.
Wire cup brush diameter: 70mm.
Weight: 1.8kg.

Available in 230V and 110V.

GWS 7-100

100mm (4") Angle Grinder

GWS 7-100
Particularly small grip circumference for safe, non-fatigue working. Good handling due to the flat gear head and switchable right or left side handle. Spindle lock for easy disc changes. Protective guard. Safety switch. Gear head can be rotated in 90 steps. Suitable for SDS quick-locking nut (special accessory). Comes with: Protective guard, 2-hole spanner, Auxiliary handle, Locking nut and Flange.

Rated power input: 720W.
No-load speed: 11.000rpm.
Grinding spindle thread: M10.
Disc diameter: 100mm.
Rubber sanding plate, diameter: 100mm.
Wire cup brush diameter: 70mm.
Weight: 1.8kg.

Available in 230V and 110V.

GWS 7-100

Bosch S3456XF Sabre Saw Blade - Multi-purpose (5 Pack)

Areas of application Wood with nails/metal, chipboards (5-150mm), sheet metal, aluminium profiles (3-18mm), plastics/Glass fibre reinforced plastics, profiles (dia. 5-150mm).



Total length: 200mm.
Thickness: 1.25mm.
Width: 19mm.
Tooth spacing, progr., min.: 2.1mm.
Tooth spacing, progr., max.: 4.3mm.
TPI progr., min.: 6 TPI.
TPI progr., max.: 12 TPI.
Tooth design side set, milled.

Bosch® 5" Angle Grinders

GWS 12-125CI
The compact tool with KickBack Stop - detects when the tool is jammed and shuts it down immediately. Distortion-resistant protective guard. Vibration control auxiliary handle with 70% vibration reduction for non-fatigue working (EN 50144). Direct cooling for high overload capability and long service life. Constant Electronic for constant speed, also under heavy load. Overload protection, smooth start and starting current limitation. Good handling thanks to slim housing. Gear head can be rotated in 90° steps. Handle can be used on right or left.

Specifications:
Power input: 1100W.
No load speed: 11000rpm.
Power output: 660W.
Spindle thread: M14.
Disc diameter: 125mm.
Rubber sanding plate diameter: 125mm.
Wire cup brush diameter: 70mm.
Weight: 1.60kg.
Comes with: protective guard, vibration control auxiliary handle, back flange, locking nut, two pin spanner, quick-locking nut and carrying case.

Disc supplied separately.

Bosch 355mm (14") Professional Cut-Off Saw

Extremely robust lever and spring combination for the highest workloads. Powerful 2000W motor and user friendly quick clamping mechanism with continuously variable mitre angle setting up to 45°. Vertical D-handle for ergonomic working. Integrated handle for easy transport.

GCO 2000 Cut-Off Saw

Specifications:
Cutting capacities: rectangle 180 x 85mm, square 110 x 110 mm, L-profile 130 x 130mm.
No-load speed 3500rpm.
Cutting disc dia: 355mm.
Cutting disc bore: 25.4mm.
Weight: 18kg.

Available in 240V and 110V.

Impact Wrench

impact wrench that features a 1/2" square drive, perfect for hard nut applications on Hex heads, bolt tightening, fitting anchors in stone or brick and clamping pipes or wood together. Ball socket retention to allow for easy exchange and removal of nuts.

No Load speed: 2800rpm
Impact rate: 3200rpm
Bolt range: M4-M16

Naked tool only - Batteries and Charger are supplied separately.

Straight Grinder

For straight grinding wheels 125mm x 32mm and cup brushes/cup wheels up to 125mm diameter. Wheel mounting to suit 20mm bore. (M14 spindle). No load speed: 6800rpm. Power input: 1150W.

GGS 6

Impact Drill

High-performance impact drill with high torque for the most heavy-duty applications with large diameters (drilling, working with core cutters and holesaws), screwdriving and stirring. Single-sleeve keyless chuck with Auto-Lock for quick accessory changes with only one hand.

No load speed: 900/3000rpm
Impact rate: 15300/51000bpm
Torque (Nm): 40/14.5
Drilling capacities: wood 40mm concrete 24mm, steel 16mm
Weight: 2.9kg