Canning-Lippert Satinise Finishing Compositions

A specifically formulated dressing to coat the mop prior to the application of satene. Assists in the performance and allows thicker coatings to be built up. Use where deburring, deflashing or stock removal is needed.

1615-250 Satene Bond

Canning-Lippert General Finishing Bar

Primarily for polyester and nitro-cellulose lacquers. Good general-purpose composition for producing a high gloss on most plastics.

1635-007 Vonax

Canning-Lippert Climax Quality Mops (Extra Soft)

Designed specifically for use on plastics but is also suitable for gold and silver. Extremely soft cloth that is unsuitable for steel, stainless and non-ferrous metals. Open type construction for medium polishing pressure. For use with Vonax composition.



Product Number: 0209-075. Diameter: 6". Width: 1". Weight: 160g.

Canning-Lippert "B" Quality Mops WO 2899 - Stitched Type

All round mops as above with 3/8" (9.5mm) spiral stitching. Having all the attributes of the above mops but will not splay to the extent of the open type giving greater polishing pressure. Fitted with washers for taper spindle use. Can be used in conjunction with Lustre, Hyfin, Steelbrite, Scovax, and Satene compositions.



Product Number: 0229-573. Diameter: 6". Width: 1". Weight: 240g.

Canning-Lippert "G" Quality Mops - Open Type (Soft)

Designed to produce high quality finishes on non-ferrous metals such as brass, copper, aluminium and pewter. Can also be used on plastics for a medium finish. Open type construction for medium polishing pressure. Can be used in conjunction with Hyfin and Steelbrite compositions.



Product Number: 0201-060. Diameter: 4". Width: 2".

Canning-Lippert "B" Quality Mops WO 2899 - Stitched Type

All round mops as above with 3/8" (9.5mm) spiral stitching. Having all the attributes of the above mops but will not splay to the extent of the open type giving greater polishing pressure. Fitted with washers for taper spindle use. Can be used in conjunction with Lustre, Hyfin, Steelbrite, Scovax, and Satene compositions.



Product Number: 0229-882. Diameter: 8". Width: 1". Weight: 490g.

Canning-Lippert "B" Quality Mop - Open Type (Medium Hardness)

All round mops for finishing steel and pressed brassware, nickel-silver, copper, brass, silver, aluminium chrome and plastics. Also suitable for nickel and chrome deposits. Made up of guaranteed quality all-cotton cloth in multiple sections of 1/2" (13mm) width. Open type mops will splay under pressure to suit irregular surfaces and give a medium polishing pressure. Can be used in conjunction with Lustre, Hyfin, Steelbrite, Scovax, and Satene compositions.



Product Number: 0220-193. Diameter: 6". Width: 2". Weight: 480g.

Canning-Lippert "Crown 65" Mops Medium Hardness

White Felt blended and milled from high grade wool. Durable uniform texture made in three densities: hard and medium for firmness and soft for flexibility. Recommended for wet processes, i.e. glass polishing, etc. Specially made under strictly controlled manufacturing conditions. Can be used with 0704-254 steel arbor.

Small Diameter

Product Number: 0621-257. Diameter: 4". Width: 1". Weight: 130g.

Canning-Lippert Prefinish Compositions

An alternative to Carbrax where brightness of finish rather than superior cutting properties is the major requirement.

1620-165 Steelcut

Canning-Lippert "G" Quality Mops - Open Type (Soft)

Designed to produce high quality finishes on non-ferrous metals such as brass, copper, aluminium and pewter. Can also be used on plastics for a medium finish. Open type construction for medium polishing pressure. Can be used in conjunction with Hyfin and Steelbrite compositions.



Product Number: 0201-102. Diameter: 6". Width: 1/2". Weight: 110g.