355mm (14") Abrasive Cut-Off Saw

Shaft lock. Double action safety switch. Quick release vice. Double insulated. Accessories include: Cut-off wheel, socket wrench, wheel arbor, inner flange, outer flange bolt and washer.

2414NB

Max. Cutting Capacity: 115mm. No Load Speed: 3,800rpm. Wheel Diameter: 355mm. Hole Diameter: 25.4mm. Power Input: 1,650W. Net Weight: 16.3kg.

18v Jigsaw

Lightweight and compact with smooth and powerful cutting at the high rotational speed at 2,600rpm. Easy to trace cutting line with LED job light. Rubberised soft grip of ergonmic design. Supplied with fast charger, Battery cartridges Hex wrench, Kerf board Cover plate, Dust nozzle Case
Strokes per minute: 0-2,600
Length of Stroke: 26mm
Max Cut in Wood: 135mm
Max in Steel: 10mm
Battery: Li-ion
Net Weight: 2.8kg

BJV180RFE

Makita Batteries for Cordless Tools

Charger compatibility: DC18RA, DC18SE, DC24SC, DC24WA.

NiMh Batteries - ?Slide-On? Type

Makita Angle Grinders

Small diameter Angle grinders with ergonomically best possible barrel grip. Regardless of whether the user grips motor housing or rear cover, the extra-ergonomic barrel grip fits any user’s palm and fingers perfectly, and provides easy and comfortable handling while minimizing hand fatigue and pain.

GA4530 115mm (6”) Angle Grinder

GA4530 115mm (6”) Angle Grinder Specifications:
Bore Diameter: 22.23mm.
Wheel Size: 115mm (6”).
Input Wattage: 720w.
No Load Speed: 11,000rpm.
Net weight: 1.8kg.

Features Include:
Small gear housing for easy handling and manoeuvrability.
Machined bevel gears.
Powerful 720W motor with excellent heat-resistance.
Ergonomic 20 degree side grip angle.

110V Order code: MAK-275-6107G
240V Order code: MAK-275-6107H

Cordless Impact Driver

14.4V impact screwdriver that delivers high torque for excellent performance. Supplied complete with 2 batteries, charger and carry case.

No Load Speed: 2600rpm
Battery capacity: 3.0Ah
Machine Screw: M4-M8
Standard Bolt: M5-M14
Impact rate: 3200rpm
Weight: 1.6kg

18V Cordless Impact Wrench

Same fastening torque in forward and reverse rotations with full torque at 6 seconds after seating. Compact design provides more control and maneuverability. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact. The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are joined with vibration absorbing cushion rubbers. The large bumper protects workpiece from scratches,increasing maneuverability. Ergonomically designed handle with rubberized soft grip provides more control and comfort. Easy-to-operate LED light for illuminated operation can be turned on or off with an independent switch, and features an over-discharge-protective circuit. Also features a hanging hook.

Capacity: Standard bolt:M12 - M22; High tensile bolt: M12 - M16
Impacts per minute: 2,200
No load speed: 1,600rpm
Maximum torque 440Nm
Dimensions (L x W x H) 266mm x 82mm x 290mm
Net weight: 3.4kg

Naked tool only - Batteries and Charger not supplied.

Makita Angle Grinders

Makita GA4030 small diameter Angle grinders with ergonomically barrel grip. Regardless of whether the user grips motor housing or rear cover, the extra-ergonomic barrel grip fits any user’s palm and fingers perfectly, and provides easy and comfortable handling while minimizing hand fatigue and pain.

GA4030 100mm (4”) Angle Grinder

GA4030 100mm (4”) Angle Grinder Specifications
Bore Diameter: 16mm
Wheel Size: 110mm
Input Wattage: 720w
No Load Speed: 11,000rpm
Net weight: 1.7kg

Features include:
Machined bevel gears.
Small gear housing for easy handling and manoeuvrability.
Powerful 720W motor with excellent heat-resistance.
Ergonomic 20 degree side grip angle.


110V Order code: MAK-275-6107A
240V Order code: MAK-275-6107B

Makita Belt Sander

9920
1,010 watt motor. Unique design allows flush sanding to a wall with side of sander. With electronic variable speed control; just turn dial for optimal speed of job. Features auto-tracking belt system, high dust collecting capacity and low noise at 85dB.

Specifications:
Belt size: 76 x 610mm.
Belt speed: 210-440m/min.
Power rating: 1,010W.
Weight: 4.5kg.
Supplied with: abrasive belt, cork/carbon pad, and dust bag.

Available in 240V and 110V.

RP1801X

Chip guard. Tool-less template guide system. Lock on switch.
Spindle lock. Built in fan to minimise dust entering machine. Extended depth control knob.
Power input: 1,650W.
No load speed: 22,000rpm.
Collet sizes: 1/4” & 1/2”
Plunge depth: 0 - 70mm.
Accessories: guide holder assembly, dust nozzle, straight guide with fine adjuster, wrench

Makita Battery Chargers for Cordless Tools

Li-Ion/Makstar Chargers. These chargers use a built-in memory chip in the battery and a chip in the charger to decide on the best charging method. Optimal charging is achieved by controlling current, voltage and thermal. Additional chargers used in conjunction with extra batteries also increase productivity, charging batteries while not in use. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing.

DC24SC Battery Charger

Li-Ion/NiMH quick charger. 7.2 to 24V. 30 minute charge (3.0Ah battery).