Spare Anvils Oxford Dial Indicating Bore Gauges

To suit Gauge Size: 1.4 - 6.0`

Inch Gauge Sizes

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

UNF - Class 2B Tolerance

Digital Height Gauge

Digital height gauge series feature a hardened stainless steel beam and the latest in high contrast ?Supertwist? LCD displays. Supplied with a carbide scriber the gauge can be fine adjusted to exactly the required height and then locked in position for scribing. Alternatively, use the underside of the scriber tip for height measurements. Available with 300mm/12" and 600mm/24" measuring ranges. Other sizes available on request. Absolute/Incremental mode allows fixed and floating datums.Metric/imperial conversion.0.01mm/0.005" resolution.Carbide Scriber.300/600mm travel.High contrast digital display.Full 1 year manufacturers warranty.

DHG-150 Mini Digital Height Gauge

2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).

Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.Manufactured to BS 870.

167 Series (Micrometer NOT included)

Dial Indicators - 41mm Diameter Face

Water Resistent Type. Model 1900F-60 has limit hands, stroke 2mm and a white/red dial. Model 1929F-60 has limit hands, stroke 3.5mm and a yellow/red dial.

Series 1

Sylvac S_Mike Pro Digital Micrometer

Complies with: DIN 863
Features:
• Automatic wake-up by moving the measuring spindle
• Sleep mode after 20 min. of no use
• Position memorised in sleep mode
• Water protected for heavy-duty work with coolants and
lubricants, protection rating IP67 according to IEC60529,
with or without connector
• Measuring range 0 - 102mm covered with 3 instruments only
• Set of 3 micrometers 0 - 102 mm available
• Quick displacement of the measuring spindle 12mm / rotation
• Adjustable measuring force 5N / 10N
• Battery life 12,000 hours
• Non-rotating spindle
• Preset function
• Setting masters provided where applicable**

?One Mark? Pipettes

Complies with BS 1583, ISO 648 and DIN 12690. Calibrated for delivery. Manufactured from soda-lime glass. Tooled jets for extra strength and to ensure correct outflow time. Markings and inscriptions permanent amber stain.

Available in 5ml, 10ml, 25ml and 50ml capacities and types Class A and Class B. Class A is available in a pack of 2. Class B available as singles or in packs of 5.

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble