Moore & Wright Basic Line Digital Caliper

MW110-30DBL:
Capacity: 0-300mm/12".
Resolution: 0.01mm/0.0005".
Jaw length: 60mm.

Features:
Standard Digitronic caliper.
On/off switch.
Zero point at any position.
Displays values in mm and inch.
All metal parts made of hardened stainless steel.
CR2032 battery.
Complies with DIN862.

External Micrometers - Mechanical

All have tungsten carbide measuring faces with a choice of standard or vernier type sleeve. Fitted with a 6.8mm spindle diameter, speeder type ratchet and locking lever. Supplied with an adjusting key.
Comply with BS870, DIN863/1, ISO361.

Series 1966 - Inch

Blue textured tapered bow frame. Supplied in a durable plastic pocket case.

Graduation: 0.001".

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Sets

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

Metric Coarse - Class 6H Tolerance

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

Metric Fine - Class Tolerance 6G

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

Metric Fine - Class 6H Tolerance

Digital Electronic External Micrometer

Easy handling with a large digital display, quick response speed and zero set at any point. mm/inch measurement. The micrometer can be connected to PC's serial port by the SPC cable provided.
Range: 0-25mm/0-1"
Resoloution: 0.001mm/0.00005"
Measuring force: 5-10N
Accuracy: -0.004mm
Power Consumption:35m
Storage temperature: -20 to 60C
Operating temperature: 0 to 40C
IP rating: 54IP

Pocket Comparators

By replacing reticles (optional), dimensional, angle and other types of measurements can be performed.

Series 183

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

Metric Coarse - Class 6H Tolerance

Pyrex Wide Neck Conical Flasks

Complies with DIN 12385. Erlenmeyer pattern. Manufactured from Pyrex borosilicate glass. Excellent thermal performance. High resistance to chemical attack. White enamel graduations and marking spot.

Available in 50ml, 100ml, 250ml, 500ml and 1000ml capacities, in singles or in packs of 10.