Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

UNF - Class 2B Tolerance

Level Developments Precision Screw-on Levels

For permanent fixing to machines and other units to level and check horizontal surfaces. Durable construction. Hardened base. Vial is protected from damage by a tough plastic screen.
Available in 2 models, with sensitivities of 0.4mm/M (0.004/10") or 0.05mm/M (0.0005/10"). Length: 120mm.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

UNF - Class 2B Tolerance

Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 12.5mm capacity. METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.) Accuracy: Units between 2-50mm: 0.004mm. Units between 50-200mm: 0.005mm. Units between 200-300mm: 0.007mm.

Individual units

Supplied with: Digital pistol grip, head and setting ring.

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Level Developments Master Block Level

For levelling and checking horizontal surfaces. Manufactured from stabilised cast iron. Hardened, flat and vee load bearing surfaces. Two vials (horizontal and vertical) with exceptional shock resistance. Large bubbles for maximum clarity. Glass vial protection with metal cover plate protects against hand heat. Supplied in a wooden storage case. Length: 200mm. Sensitivity: 0.02mm/M. Weight: 1.55kg.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

Metric Fine - Class 6H Tolerance

Oxford Precision™ Granite

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.



Accurate bases which are used for mounting sensitive measuring, mechanical & electronic equipment. Manufactured to BS817. Supplied with calibration certificate.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

BSW - Medium Class Tolerance

CIE-Group Digital Thermometer

DT82
High accuracy digital thermometer complete with test probes and carry case.

Features:
Function keys: max/min, REL, T1 - T2, 5-digit display, high accuracy with 0.1 resolution. Auto power off, fast response and low power indication. CE certified.