Granite Surface Plate Stand

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.

Squares

For measuring and inspecting squareness, parallelism and alignment. Manufactured to BS939 : 1977 Grade A for flatness, straightness and squareness of working faces. Supplied with UKAS certificate.

Standard Vernier Caliper

14 Vernier face angle provides easy reading. Thumbwheel and locknut. Incorporates Quadri feature.

Series 530

Grade 2-For workshop use.

Manufactured to BS EN ISO 3650. Available in two grades.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

Metric Coarse - Class 6H Tolerance

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

BSW - Medium Class Tolerance

?One Mark? Pipettes

Complies with BS 1583, ISO 648 and DIN 12690. Calibrated for delivery. Manufactured from soda-lime glass. Tooled jets for extra strength and to ensure correct outflow time. Markings and inscriptions permanent amber stain.

Available in 5ml, 10ml, 25ml and 50ml capacities and types Class A and Class B. Class A is available in a pack of 2. Class B available as singles or in packs of 5.

2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

Metric Coarse - Class 6H Tolerance

Plunger Type Dial Test Indicators

Precision plunger dial indicators are suitable for various applications in the workshop or inspection department. All units are supplied with 8mm stems, 3mm diameter carbide ball anvil and standard offset lug backplate.
Accuracy: resolution down to 0.001mm. Calibration certificate supplied with all indicators reading better than 0.1mm.

FM-4 Graduated 0.002mm, 5mm travel, duel scale 0-20/ 0-10-0.

FM/FI Series

Volumetric Flasks - Class B

Complies with ISO 1042. Manufactured from borosilicate glass for corrosion-free performance. Inscriptions in blue enamel. Supplied with polyethylene stopper.

Available in 25ml, 50ml, 100ml, 200ml, 250ml, 500ml and 1000ml capacities.