Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232 data output. Preset facility for inputting ring size. True metric/imperial conversion.\tResolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 6mm capacity. Setting rings come complete with UKAS calibration certificate.Accuracy: Units between 2-50mm:\t0.004mm. Units between 50-200mm:\t0.005mm. Units between 200-300mm:\t0.007mm.

Complete sets

Supplied with: Digital pistol grip, head and setting rings.

Dial Indicators - 1 1/2" Diameter Face

With Rev. Counter

Series 1

Block Sets

Supplied in high quality wooden bench cases, complete with certificate of calibration. Available in two grades. Manufactured to BS EN ISO 3650.

Grade 1-For inspection use

81 Piece Inch.

Series 505

Easy read dial suitable for use where a scale would be difficult to read. Satin chrome finish. Incorporates quadri feature.

Large Digital Countdown Timer

Counts down from a maximum of 99 minutes 59 Seconds. Countdown only. Supplied with stand, clip and magnet fixing.
Size: 80 x 70 x 20mm
LCD size 64 x 38mm
Batteries Included.

Sample Containers

Ideal for sample containment. CE marked in accordance with the European Directive 98/79/EC. For in vitro use only. Choice of plastic or metal flow seal cap. Leak tested in accordance with EN14254 Annexe D and BS5213. Aseptically manufactured under cleanroom conditions (class 7 ISO 14644) to exclude microbiological contamination. Manufactured from virgin polystyrene. All materials are non-cytotoxic. Sterility: (AS) Aseptic Manufacture.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

Metric Coarse - Class 6H Tolerance

Digimatic Type Absolute Calipers

With SPC Data output. Inch/metric conversion. On/Off. Zero set at any point. Data/Hold facility. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Azlon Bulb Pipettes Class B PP

Calibrated to meet class B tolerance. Permanently marked with ring and inscriptions. Exposure to temperatures above 60C may affect accuracy. Recommend cleaning with mild alkaline detergents up to 60C.

Available in capacities: 2ml, 5ml, 10ml, 25ml and 50ml. Other sizes available on request.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

BSW - Medium Class Tolerance