RT5 Reflective Tape

RT5 reflective tape for Compact Instruments CT-6 Tachometer illustrated (CTL-315-3100M).
Available in 2 sizes: 150mm x25mm and 5000mm x 25mm.

Oxford Precision™ Granite

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.

Surface Plates - Grade 1 - Inspection Grade

Accurate bases which are used for mounting sensitive measuring, mechanical & electronic equipment. Manufactured to BS817. Supplied with calibration certificate.

Interchangeable Anvil Type

One piece carbide tip spindle and six interchangeable anvils. Positive locking clamp and ratchet stop. Supplied with standards. Power Supply: Battery 1 off SR44 (PAN-904-5020K) supplied. Accuracy: Parallelism: (2L/100)mm (fraction rounded down). Flatness: within 0.6mm for up to 300mm within 1.0mm for up to 1000mm. Instrument Error: (4L/75)mm (fraction rounded up). Resolution: 0.001mm/0.00005"

Series 340

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Combitest Type - Sets

Pyrex Measuring Cylinders With Spouts

Complies with BS 604, ISO 4788, DIN 12680. Manufactured from chemically resistant borosilicate glass. Robust hexagonal foot. White enamel graduations which remain visible when using dark coloured solutions. Pack quantity: 2.

Available in 25ml, 50ml, 100ml, 250ml, 500ml and 1000ml capacities.

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Medium Duty Fitment - Plain

Fitted as standard to KEN-333-2080K. To suit 1/4" I/D/ lug, stem/spigot diameter 5/16".
Column: 12.5mm x 185mm.
Cross Bar: 6.3 x 150mm.
Threaded: M8 x 1.25mm.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

BSF - Medium Class Tolerance

Pyrex Wide Neck Conical Flasks

Complies with DIN 12385. Erlenmeyer pattern. Manufactured from Pyrex borosilicate glass. Excellent thermal performance. High resistance to chemical attack. White enamel graduations and marking spot.

Available in 50ml, 100ml, 250ml, 500ml and 1000ml capacities, in singles or in packs of 10.

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.



Supplied in Pairs

Dual Reading 'Metrinch' Dial Test indicator

The answer to metric conversion problems



T34 Metrinch