Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

UNF - Class 2B Tolerance

Moore & Wright Digitronic Internal Calipers

MW432-02DC:
Range: 10-20mm/0.4-0.8".

Features:
Large LCD display.
0.01mm or 0.0005" resolution.
Preset capability.
Direct Inch/Metric conversion.
Absolute/Incremental measurements.

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Cuvettes

Suitable for use with most spectrophotometers for water analysis, chemistry and life science applications. Choice of material: - Optical quality polystyrene for use at visible wavelengths (340 to 900nm) - Optical quality acrylic (PMMA) for use at ultra violet wavelengths (300 to 900nm). Each case contains cuvettes from the same mould cavity to ensure minimal dimensional variation. Standard absorption variation between cuvettes is better than plus/minus 0.005 absorbency units. Two sizes available - semi-micro cuvette and macro cuvette. Standard path length of 10mm. Frosted sides on the cuvette. Recessed windows reduce the risk of scratching during use. For ease of use an arrow feature indicates the direction of light transmission. Packed in expanded polystyrene (EPS) foam trays for optimum protection ensuring scratch free product at the time of use. Material: (PS) Polystyrene. Sterility: (NS) non sterile.

Dial Calipers

Rack covers prevent dust from fouling teeth of racks. All measuring faces are precision ground and micro lapped for absolute internal, external, depth and step readings. Manufactured to DIN 862.

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

BSPF - Medium Class Tolerance

Oxford Precision™ Granite

Precision granite products are manufactured to the highest quality standards to provide an accurate surface from which final measurements can be taken. More dimensionally stable than steel or cast iron, with a low thermal expansion co-efficient. Does not burr, is corrosion free and easy to maintain.

Squares

For measuring and inspecting squareness, parallelism and alignment. Manufactured to BS939 : 1977 Grade A for flatness, straightness and squareness of working faces. Supplied with UKAS certificate.

Azlon Safety Shields

Tough, clear polycarbonate. Supplied as three panels joined by polypropylene hinges. Adjustable, can be used as a tight triangle or extended out to a straight line configuration. Suitable for classrooms, laboratories and factories. Stronger than armoured glass giving maximum protection from flying glass, hot liquids and other hazards. The material has a very low flammability being self extinguishing (passes BS2782 part 5 1970 Methods 508A and 508D) (Din 4 102). The bases consists of a pair of plastic coated metal feet measuring 60 x 150mm and weighing 700g. The bases can be clamped or bolted onto the bench to give greater stability. Each set is supplied with two base sets but without clamp.

Available in
Small:-
Height 38cm.
Outside panel width 180mm.
Centre panel width 230mm.
Total width 590mm.

Large:-
Height 61cm.
Outside panel width 226mm.
Centre panel width 300mm.
Total width 750mm.

Other sizes available on request.

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

BSPF - Medium Class Tolerance

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

Metric Coarse - Class Tolerance 6G