Moore & Wright Depth Gauge Micrometers - Mechanical

Comply with BS6468.

891 Series

Interchangeable depth rods, 4mm diameter.

Digimatic non output type Height Gauge

Double column provides highly repeatable measurements and stability

192-630-10 Digimatic Height Gauge

Clear LCD screen for error free reading
Imperial/Metric conversion
Zero/ABSolute
Origin setting
Preset
/- directional switching
Data hold
Overspeed alarm
Coarse/fine feed switching
Tungsten Carbide tipped scriber
Resolution: 0.01mm/0.0005", Range: 300mm/12", Weight: 4.7kg
Accuracy: 0-300mm /- 0.02mm, 0-600mm /- 0.05mm, 0-1000mm /- 0.07mm

Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.Manufactured to BS 870.

167 Series (Micrometer NOT included)

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

Metric Fine - Class 6H Tolerance

Outside Micrometer

Tungsten Carbide measuring faces with tapered bow frame. Frame is cut away at the anvil end to facilitate usage in narrow slots. Complete with ratchet, locking lever and supplied in a plastic case.
Range: 0 - 1??.
Graduation: 0.001??.

Test Tubes With Rims and Medium Walls

High quality test tubes designed and constructed for optimum performance. Manufactured from Pyrex borosilicate glass which gives superior performance to neutral borosilicate and soda-lime glass - Allows use at high temperatures - Excellent resistance to chemical attack. Tubes up to 12mm dia. are 1.0mm wall thickness, larger sizes are 1.2mm thick.
Conforms to ISO 4142.

Available in:
(Dia)12mm x (L)75mm
(Dia)12mm x (L)100mm
(Dia)16mm x (L)125mm
(Dia)16mm x (L)150mm
(Dia)18mm x (L)180mm
(Dia)18mm x (L)150mm

Available in packs of 10 and 100.

Tubular Extension Sets - Pipe Type

Each set consists of inside micrometer head and a series of extension pipes of different length, which are hardened, ground, micro-lapped and heat insulated. Satin chrome finished head with positive locking clamp and carbide measuring faces. All sets include micrometer head. Accuracy: Micrometer head stroke: 25mm (1"). Graduation: 0.01mm (.001"). Instrument Error: /-(3qty of rod L/50) mu m. L Maximum measuring length

Series 139

Kennedy® External Micrometers

Kennedy® Enamelled Frame External Micrometers for taking external measurements accurately. The alloy steel spindle is held rigid in a drop forged steel frame and is fitted with a speeder type ratchet thimble for rapid adjustment and a fine adjustment thimble for taking precise measurements. The spindle can be locked in position by the using the spindle lock lever this retains the spindle position for reference. The anvils are optically flat tungsten carbide for a hardwearing contact surface that ensures precise measurements every time. Manufactured to BS 870.

Accuracy: Flatness: 0.6mm.
Parallelism: (2 + L/100)mm (fraction rounded down). Instrumental error: +/-(1 + L/75)mm (fraction rounded up).
L = maximum measuring length.

Inch Enamelled Frame External Micrometers Tungsten Carbide Tipped Anvils

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

BSW - Medium Class Tolerance

Vernier Calipers

Inside, outside, depth and step reading. Dual reading scale (metric and inch) with 14 bevelled vernier scale. Knurled locking nut. Manufactured from hardened stainless steel with satin finish.
Graduation: 0.02mm & 0.001 inch.
Tolerance: plus/minus 0.03mm & 0.001 inch.