Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

Metric Fine - Class 6H Tolerance

Counter Sales Tachometer

The CT6 Hand-Held Rate & Time Indicator's display provides a highly visible reading, even in dim light or at indirect viewing angles. When used as a non-contact indicator, a marker (reflective tape, supplied) is placed on the shaft, or other target that is to be measured. The CT6 is then simply pointed at the marker to read rate-per-minute, seconds-per-event, or counts. An in-contact adaptor is provided that allows display of linear feet or meters per minute, RPM, or counts. Complete kit includes Hand Tachometer, in-contact adaptor, carrying case and reflective tape. Microprocessor circuit allows switch selection of rate, time, or counting modes. High contrast LED display can be easily seen in dim or shadowed lighting conditions. Measures speeds from 3rpm to 99,999rpm. Fixed or floating decimal point operation. Automatic shut-off with display memory recall. Up to eight hours operating time from set of standard AA cells. Target-detect, and battery-low indicators. Lightweight yet rugged design, fits comfortably in hand. Optional plug-in pickup allows remote or fixed mount sensing. The CT6 system is packaged in a rugged carrying case. A generous supply of reflective tape is included. Dimensions: L x W x D 205 x 70 x 40mm.

CT6

Specifications:
Measurement Range: RPM: 3 to 99,999; M/min: 0.3 to 19,999; Ft/min: 0.3 to 19,999; time-interval: 0.01 to 99,999 sec. Counts: 1 to 99,999.
Display: 5 digit red LED, 0.4" (10.5mm), floating decimal in autorange mode.
Display Update Time: 0.8 second above 75rpm, time between pulses below 75rpm.
Accuracy: RPM: +/-0.05% of reading, +/-1 digit; M/min & Ft/min: +/-2% of reading.
Time Base: crystal controlled.
Auto/Fixed Ranges: user selectable via yellow switch.
Resolution: Rate, fixed decimal mode: +/-1 digit; Rate, Autorange: maximum 0.001 units (revs/meters/feet); time modes: max. 0.01 sec., autoranging only; count mode: 1 count (1 pulse/shaft rev. in contact mode).
Auto Power-Off: after release of button, reading displayed for 10 seconds then switches off.
Memory Recall: last reading available for up to 1 minute after automatic power-off.
Over Range: display flashes.
Under Range: display reverts to zero (rate modes).
On Target Indicator: green LED glows when optical alignment is correct.
Battery Low Indication: red LED glows when batteries are nearing replacement level.
Optical Range: 1" - 3 feet (25mm - 1000mm).
Light Source: visible light, long life lamp.
Operating Temperature: 32° to 113°F (0° to 45°C).
Weight: 794g.

Screw Thread Micrometer

Interchangeable V-anvils allow various pitches to be measured with a single micrometer. With ratchet stop. Accuracy: 0-75mm /-4 mu m, 75-100mm /-5 mu m. Anvils supplied separately.

126 Series

Pipette Tips

Manufactured from virgin polypropylene and metal-free pigments. High translucency for excellent visibility of sample. Hydrophobic surface to minimise fluid retention. Precision moulded for clean delivery. Non-sterile and autoclavable at 121C. Available bulk packed, an economical choice for the busy laboratory, or as rack packed refills for ease of handling. Sterility: (NS) Non sterile.

Other sizes available on request.

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

Metric Coarse - Class Tolerance 6G

Test Tubes With Rims and Medium Walls

High quality test tubes designed and constructed for optimum performance. Manufactured from Pyrex borosilicate glass which gives superior performance to neutral borosilicate and soda-lime glass - Allows use at high temperatures - Excellent resistance to chemical attack. Tubes up to 12mm dia. are 1.0mm wall thickness, larger sizes are 1.2mm thick.
Conforms to ISO 4142.

Available in:
(Dia)12mm x (L)75mm
(Dia)12mm x (L)100mm
(Dia)16mm x (L)125mm
(Dia)16mm x (L)150mm
(Dia)18mm x (L)180mm
(Dia)18mm x (L)150mm

Available in packs of 10 and 100.

Azlon Bulb Pipettes Class B PP

Calibrated to meet class B tolerance. Permanently marked with ring and inscriptions. Exposure to temperatures above 60C may affect accuracy. Recommend cleaning with mild alkaline detergents up to 60C.

Available in capacities: 2ml, 5ml, 10ml, 25ml and 50ml. Other sizes available on request.

Kennedy® Precision Vernier Calipers

Give outside, inside, depth and step readings. Fine adjustment feature. 14° Vernier face angle reduces parallax. Incorporating Quadri feature.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

UNC - Class 2B Tolerance