Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

BSF - Medium Class Tolerance

Oxford Precision™ Vernier Bevel Protractor

Suitable for measuring and marking out angles. Fully hardened and ground stainless steel. Bevelled blade ends. Scale plate is graduated 0° - 90° - 0°, in both directions through
360°. Magnifying lens for easy reading of Vernier scale to 5 minutes of degree (1/12th of a degree).

Petri Dish 140mm Triple Vent

Ideal for applications where a large surface area and very flat base are required. Easy grip ridges on the base to aid individual dish handling. Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination. Produced and tested in accordance with the BS611 part 2 standard, which includes stringent dimensional controls. Ideal for use in automatic plate pourers. Sterility: (AS) Aseptic Manufacture.

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

BSW - Medium Class Tolerance

Oxford 3 Point Bore Micrometers

Designed to self-centre, for accurate measuring of bores.
Extension rods for measuring 170mm deep on 11 - 20mm and 220mm deep on 20 - 40mm.
Satin finish, fitted with knurled ratchet stop.

Kennedy® External Micrometers

Kennedy® Enamelled Frame External Micrometers for taking external measurements accurately. The alloy steel spindle is held rigid in a drop forged steel frame and is fitted with a speeder type ratchet thimble for rapid adjustment and a fine adjustment thimble for taking precise measurements. The spindle can be locked in position by the using the spindle lock lever this retains the spindle position for reference. The anvils are optically flat tungsten carbide for a hardwearing contact surface that ensures precise measurements every time. Manufactured to BS 870.

Accuracy: Flatness: 0.6mm.
Parallelism: (2 + L/100)mm (fraction rounded down). Instrumental error: +/-(1 + L/75)mm (fraction rounded up).
L = maximum measuring length.

Inch Enamelled Frame External Micrometers Tungsten Carbide Tipped Anvils

Satin Chrome Finished Frame

Applications include measuring wall thickness of cylinders and tubes, shoulder to edge distance, rivet head height etc., accomplished using the: standard flat anvil, rod anvil, or optional V-anvil. Easily interchanged, with constant force ratchet and positive locking clamp. Quick and easy zero adjustment. Interchangeable anvils supplied: Flat anvil: (201216). Rod anvil: (201217) 3mm diameter for 0-25mm/0-1", (201379) 5mm diameter for 25-50mm/1-2". V-anvil: (201218) Available at extra cost. For measuring thickness of screw, shoulder length etc. Accuracy: Flatness: 2mm (Anvil Face), 0.6mm (Spindle Face). Parallelism: 3mm. Instrument Error: /-4mm.

Series 117

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

BA - Medium Class Tolerance

Grade 2-For workshop use.

Manufactured to BS EN ISO 3650. Available in two grades.

Leg Type Dial Calipers

Used for measuring diameters and narrow grooves in hard to reach places.



External specifications: range: 0 - 20mm, graduation: 0.01mm,
groove depth: 6mm, groove width: 3mm, throat depth: 60mm.