Pipettes with Suction Adaptor, Single Wrap

Sterilin single use, serological pipettes are manufactured using virgin grade polystyrene and to stringent quality specifications. All pipettes in our extensive range carry the following features: Gamma irradiated to ensure sterility and certified non-pyrogenic with an endotoxin level of below 0.25EU/ml. Batch specific certificate supplied in each carton. Lot number for complete traceability. Accuracy of plus/minus 1% for nominal volume. Clear black printed graduations for maximum clarity. Descending and ascending graduations to aid pipetting. Negative graduations for extra capacity. Colour coded for ease of identification. Sterility: (IRR) Irradiated for sterility. Available in 2ml, 5ml, 10ml and 50ml types.

Kennedy® External Micrometers

Kennedy® Enamelled Frame External Micrometers for taking external measurements accurately. The alloy steel spindle is held rigid in a drop forged steel frame and is fitted with a speeder type ratchet thimble for rapid adjustment and a fine adjustment thimble for taking precise measurements. The spindle can be locked in position by the using the spindle lock lever this retains the spindle position for reference. The anvils are optically flat tungsten carbide for a hardwearing contact surface that ensures precise measurements every time. Manufactured to BS 870.

Accuracy: Flatness: 0.6mm.
Parallelism: (2 + L/100)mm (fraction rounded down). Instrumental error: +/-(1 + L/75)mm (fraction rounded up).
L = maximum measuring length.

Inch Enamelled Frame External Micrometers Tungsten Carbide Tipped Anvils

Moore & Wright Digital External Micrometer

MW201-03DAB:
Range: 50-75mm/2-3".
Resolution: 0.001mm/0.00005".

Features:
Protected to IP54 specifications.
Rugged steel design.
Large LCD display.
Absolute and Incremental modes.
Carbide measuring faces.
Ball attachment included.

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Heavy Duty Vernier Caliper

Thumb wheel and locknut with fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 160

Metric & Imperial Reading Graduation: 0.02mm/0.001"

Moore & Wright IP54 Water Resistant Calipers

MW110-20WR:
Capacity: 0-200mm/8".
Resolution: 0.01mm/0.0005".
Jaw length: 50mm.

Features:
Water and dust resistant to IP54 specification.
Functions: mm/inch conversion, on/off, zero setting.
Patented ceramic capacitive sensor.
Large LCD display.
CR2032 battery.
Complies with DIN862.

Magnetic Bases

Lever type 2 magnetic faces and large vee. Universal clamp. Mounts: 1/4 I/D lug. Stem/spigot diameters: 1/8", 1/4", 5/16" & 3/8".

Fine Adjustment 2 Mag Stand

Grade 2-For workshop use.

Manufactured to BS EN ISO 3650. Available in two grades.

Fine Adjustment Type

Fine adjustment allows improved sensitivity of slider movement. 14 vernier face angle. Incorporates Quadri feature. Satin chrome finish with clear easy read graduations.

Series 532

Metric & Imperial Reading - Graduation: 0.02mm/0.001"

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

Metric Fine - Class Tolerance 6G