Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Double Ended Go & No Go

UNC - Class 2B Tolerance

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Kennedy® External Micrometers

Kennedy® Enamelled Frame External Micrometers for taking external measurements accurately. The alloy steel spindle is held rigid in a drop forged steel frame and is fitted with a speeder type ratchet thimble for rapid adjustment and a fine adjustment thimble for taking precise measurements. The spindle can be locked in position by the using the spindle lock lever this retains the spindle position for reference. The anvils are optically flat tungsten carbide for a hardwearing contact surface that ensures precise measurements every time. Manufactured to BS 870.

Accuracy: Flatness: 0.6mm.
Parallelism: (2 + L/100)mm (fraction rounded down). Instrumental error: +/-(1 + L/75)mm (fraction rounded up).
L = maximum measuring length.

Metric External Micrometers Tungsten Carbide Tipped Anvils

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

?One Mark? Pipettes

Complies with BS 1583, ISO 648 and DIN 12690. Calibrated for delivery. Manufactured from soda-lime glass. Tooled jets for extra strength and to ensure correct outflow time. Markings and inscriptions permanent amber stain.

Available in 5ml, 10ml, 25ml and 50ml capacities and types Class A and Class B. Class A is available in a pack of 2. Class B available as singles or in packs of 5.

Azlon Wide Neck Vented Wash Bottles

Labelled wide neck wash bottles featuring the patented Driplok vapour venting valve that prevents hazardous volatile solvent drips. Indelibly printed with a choice of a custom or two solvent labels all including full hazard symbols, safety information and instructions for use. Fitted with colour coded one-piece PP closures that maintain their shape in use. Closures feature precision jet-tip aperture for fine control. Bottles feature SPI recycling codes and volume information on their base. Custom/DIY version solvent bottles are also available with the Driplok valve. These are supplied with write-on areas for own solvent labeling and a supply of adhesive hazard symbols.

Available in capacities: 250ml and 500ml.

Pyrex Wide Neck Conical Flasks

Complies with DIN 12385. Erlenmeyer pattern. Manufactured from Pyrex borosilicate glass. Excellent thermal performance. High resistance to chemical attack. White enamel graduations and marking spot.

Available in 50ml, 100ml, 250ml, 500ml and 1000ml capacities, in singles or in packs of 10.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

Metric Coarse - Class 6H Tolerance

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Crossbar Assembly

With lug adaptor, 1/4" I/D lug. Accepts 4, 6 and 8mm spigot. To fit 12mm bar.

MBL Dropping Bottles

Borosilicate glass bottle, stopper and pipette. Fitted with vinyl rubber teat. Diameter 59mm, Height 115mm, Capacity 100ml.

Available as singles or in packs of 10.