Grade 2-For workshop use.

Manufactured to BS EN ISO 3650. Available in two grades.

Steel Parallels

Hardened and ground steel parallels for workshop use. Supplied in pairs for packing or levelling components prior to machining in tool rooms or machine shops.



Supplied in Pairs

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

'Rapid' Dial Test indicator

Dial face inclined to the workpiece surface to ensure good visual accessibility also incorporates a rear swivel spigot which enables centring without additional attachments. Dovetail clamping sides top and bottom. Automatic reversal movement. Dial swivels through 180 of arc and rotates for zero setting, hands travel in one direction. Jewelled with lever pivots mounted on ball bearings. 4mm (1/4") diameter spigot.

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

05. 'T' Series

These indicators have a switch lever for reversing the direction of movement. Lever mounted in ball bearings. Fitted with 4mm/1/4" diameter top spigot and holder body side clamp which accepts rods up to 6.5mm/0.256". Indicator body machined with dovetail to suit attachments.

2/3 Point Micrometers - Digital

Range of metric/imperial digital internal micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Models measuring 12.5mm and above are supplied with carbide and blind bore measuring anvils. Units below 6mm capacity are 2 point all other units are 3 point. Features include:Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.)Accuracy: Units between 1-20mm: 0.003mm. Units between 20-100mm: 0.004mm. Units between 100-200mm: 0.005mm. Units between 200-300mm: 0.006mm.

Individual units

Supplied with: Digital display unit, head and setting ring.

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

Metric Coarse - Class Tolerance 6G

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

Metric Fine - Class 6H Tolerance