Dial Depth Gauges

Designed for measuring the depth of holes, narrow grooves and steps. Hardened steel base, ground and microlapped. Dial indicator attached to the base by a clamp screw and is easily interchangeable. Spindle lifting lever is maintained under spring pressure.

Series 7

Rods supplied: 0-200mm: 10, 20, 30 & 100mm 0-8": 1, 2 & 4"

Kennedy® Easy Read Dial Gauges Plunger Type

Easy Read Dial Gauges & DTI's are designed for countless applications and available in two basic styles. With shockproof mechanisms and clear, "Easy Read" faces for zero setting. All models are operational in both directions. Supplied in fitted cases with accessories storage space. Matt finish chromed housings and black oxidised limit hands. Fitted with 1/4" inside diameter off-set back lug and 5/16" diameter stem. Manufactured to BS 907.



58mm Dial Diameter.

Azlon Classic Design Graduated PP Beakers

Popular, classic Azlon beakers designed to BS5404: Part 1 1976. Good chemical resistance. Can withstand temperatures up to 135C. Graduations and an indication of material and maximum heat resistance are clearly printed using indelible solvent resistant ink.

Available in capacities: 25ml, 50ml, 100ml, 250ml, 400ml and 1000ml, as singles or in packs of 10 (N.B. 1000ml version, single or pack of 5 only).

Kennedy® Spares

Crystal face for KEN-300-8010K, 8020K, 8030K.

Type IDS

Can be used on its own or part of a gauging system. Digimatic data output and inch/metric conversion. Direction change, origin setting, ABSolute feature. Battery life of up to 20,000 hours continuous use. With back lug on centre, for use in any imperial clamping facility (9.52mm - 3/8" diameter sleeve will need to be purchased separately).

Digital Indicator - Series Type 543 IDS

Type IDS
Can be used on its own or part of a gauging system. Digimatic data output and inch/ metric conversion.
Direction change, origin setting,
ABSolute feature.
Battery life of up to 20,000 hours continuous use.
With back lug on centre, for use in any imperial clamping facility (9.52mm - 3/8" diameter sleeve
will need to be purchased separately).

Range: 12.7mm/0.5".
Accuracy: 0.02mm/0.0008".
Resolution: 0.01mm/0.0005".

Oxford Precision™ External Micrometers

With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25-50mm/1-2" and over supplied with setting standard. All supplied in a high quality fitted metal case. Manufactured to BS 870.

Inch

Enamelled Frame External Micrometer Sets

Economy type with carbide tipped anvils. Supplied complete with measuring standard.

Accuracy: Flatness: 0.6um for up to 300mm (12").
Parallelism: (2plusL/100)um (fraction rounded down). Instrument Error: plus/minus(1plusL/75)um (fraction rounded up).
Graduation: 0.01mm/.001".
L equals maximum measuring length.

103 Series

Metric
Range: 0-75.
Set contents: 0-25, 25-50, 0.01 & 50-75mm plus 2 Standards.
Weight: 0.8kg.

Grade 2-For workshop use.

Manufactured to BS EN ISO 3650. Available in two grades.

2/3 Point Micrometers - Digital

Range of metric/imperial digital internal micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Models measuring 12.5mm and above are supplied with carbide and blind bore measuring anvils. Units below 6mm capacity are 2 point all other units are 3 point. Features include:Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.)Accuracy: Units between 1-20mm: 0.003mm. Units between 20-100mm: 0.004mm. Units between 100-200mm: 0.005mm. Units between 200-300mm: 0.006mm.

Individual units

Supplied with: Digital display unit, head and setting ring.

Screw Thread Micrometer

Anvils

126 Series