Azlon Wide Neck Vented Wash Bottles

Labelled wide neck wash bottles featuring the patented Driplok vapour venting valve that prevents hazardous volatile solvent drips. Indelibly printed with a choice of a custom or two solvent labels all including full hazard symbols, safety information and instructions for use. Fitted with colour coded one-piece PP closures that maintain their shape in use. Closures feature precision jet-tip aperture for fine control. Bottles feature SPI recycling codes and volume information on their base. Custom/DIY version solvent bottles are also available with the Driplok valve. These are supplied with write-on areas for own solvent labeling and a supply of adhesive hazard symbols.

Available in capacities: 250ml and 500ml.

100mm/4" Electronic Digital Caliper

For precision measurement of internal, external and depth dimensions. Accuracy plus/minus 0.04mm (0.0015"). Supplied with 2 batteries in plastic storage case.

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

Go

BSF - Medium Class Tolerance

Moore & Wright Digital External Micrometers

Hammertone finished frame with high quality insulated
grip. Tapered for easier access. Carbide measuring faces
and constant force ratchet on thimble. Protected to IP54.
Functions: mm/inch conversion, ABS/INC, zero setting.
Carbide measuring faces. Ball attachment included.
Resolution: 0.001mm/0.00005”.

MW200-02DAL Digital External Micrometer

Range: 25 - 50mm/1 - 2”.

Plain Surface Plates

Surface plates are used when a precision surface is key. These plates are manufactured from high quality of close grained cast iron and are stress relieved against distortion by heat treatment. Rigidity and long lasting accuracy are ensured by adequate top and side thickness and ribbed construction. The surfaces are free from pin holes, planed and hand scraped. Manufactured to BS 817.

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Illuminated
Eye Loupe

This battery powered light loupe is mainly for use in poorly lit areas, providing artificial light directly to the inspection area.The clear transparent base will also allow inspection with just the use of natural light. Textured
non-slip body for extra grip.

Supplied with hanging loop. Uses 2x C batteries, (not included order code EDI-904-3080K). Width: 36mm.

Bowers Trimos V Series Digital Height Gauge
Perfect for use in the workshop environment, the easy-to-operate Trimos V Series Height Gauge offers accuracy and repeatability alongside quick performance.

Features:
• Extremely easy to operate
• Autonomous use with rechargeable battery pack
• Clear definition of all measuring functions
• Extremely large display values
• Acceptance of a measured value by acoustic signal
• Direct RS232C data output (bi-directional)
• Supplied with setting master

20-VL600 Trimos V Series Digital Height Gauge

15ml Centrifuge Tube Bulk Pack

Recommended RCF values: - Polypropylene 15ml centrifuge tubes 6,000 x g - Polystyrene 15ml centrifuge tubes 3,500 x g. Manufactured from either optically clear polystyrene or high clarity polypropylene. Polypropylene is chemically more resistant than polystyrene and allows higher centrifugation speeds. Gamma irradiated to ensure sterility and non-pyrogenic to 0.25 EU/ml. Simple one-handed cap operation, facilitating single-handed aseptic techniques. Flat cap to allow for identification marking. Crisp white printed graduations on tube body with large marking strip for labelling. Moulded graduations on the cone of tube. Available in polystyrene foam racks or bulk packed. Capacity: 15ml. Sterility: (IRR) Irradiated for sterility. Material: tube/cap PP/PE.

'Rapid' Dial Test indicator

Dial face inclined to the workpiece surface to ensure good visual accessibility also incorporates a rear swivel spigot which enables centring without additional attachments. Dovetail clamping sides top and bottom. Automatic reversal movement. Dial swivels through 180 of arc and rotates for zero setting, hands travel in one direction. Jewelled with lever pivots mounted on ball bearings. 4mm (1/4") diameter spigot.