Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Test Blocks

Hand Held Tachometer Kit

This equipment is just as important in the implementation and day to day operations of machinery and systems as it is for maintenance. These devices are also very helpful for checking production systems as well as research and development laboratories. Within seconds you know what condition your systems are in. Example applications are: motors, turbines and pumps; centrifugals, conveyors; paper, foil, and textiles production systems; spool and transformer coiling machines; tool machines and others.

Complete Kits
Each unit is supplied with all the necessary accessories in an attractive, protective carrying case. Each attachment has been carefully designed to provide optimal mechanical stability to insure accurate, reliable and repeatable measurements.

Redpoint

Using a precision red LED light source together with a reflective marker, non-contact measurements can be made safely up to 0.6m distance (2') from the target.

Kennedy® Dial Gauge Accessories

For all Kennedy plunger type dial gauges. Steel. (Dial gauge NOT included)

Replacement Anvils

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

?One Mark? Pipettes

Complies with BS 1583, ISO 648 and DIN 12690. Calibrated for delivery. Manufactured from soda-lime glass. Tooled jets for extra strength and to ensure correct outflow time. Markings and inscriptions permanent amber stain.

Available in 5ml, 10ml, 25ml and 50ml capacities and types Class A and Class B. Class A is available in a pack of 2. Class B available as singles or in packs of 5.

Oxford Precision™ Dial Indicating Bore Gauges

Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A datum point' can be set by using a setting ring of a known diameter or a micrometer. Zero' the gauge to this datum point by rotating the bezel to align zero' with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by 'rocking' the gauge back and forth until the smallest diameter is found. All models have interchangeable anvils to cover a range of bore sizes.

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended No Go

Metric Fine - Class 6H Tolerance

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

Metric Coarse - Class Tolerance 6G