Mitutoyo Depth Micrometer - HDS Type

329 Series
The six rods are adjustable in either direction for calibration and wear compensation.
Base length: 100mm.
Rod: diameter - 4mm.
Measuring length per rod: 1?/25mm.
Power supply: battery 1x SR44
Order Code PAN-904-5020K supplied.

Accuracy:
Flatness of reference face (base): 2m.
Flatness of measuring face of rod: 0.3m.
Parallelism between reference face and measuring face: (4+L/50)m (fraction rounded up).
Zero point error of rod: (2+L/75)m (fraction rounded up).
Instrument error: 3m.

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Test Blocks

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

Metric Fine - Class Tolerance 6G

Precision Tool Set

Multi purpose precision set supplied in fitted bench case.



Contents: 0 - 25mm and 25 - 50mm external micrometer, 25mm setting standard, 2 micrometer setting spanners, 125mm/5" vernier caliper, 150mm/6" rule with pocket clip, 300mm/12" engineers rule, 100mm engineers square, pocket scriber with clip.

Laboratory consumables

150mm wooden stem. Single plain head. 100% pure white cotton.

Non-Sterile Plain Swabs

Enamelled Frame External Micrometer Sets

Economy type with carbide tipped anvils. Supplied complete with measuring standard.

Accuracy: Flatness: 0.6um for up to 300mm (12").
Parallelism: (2plusL/100)um (fraction rounded down). Instrument Error: plus/minus(1plusL/75)um (fraction rounded up).
Graduation: 0.01mm/.001".
L equals maximum measuring length.

103 Series

Inch
Range: 0-6".
Set contents: 0-1, 1-2, 2-3, 3-4, 5-6" plus 5 Standards.
Weight: 2.4kg.

Dial Calipers

Easy read dial suitable for use where a scale would be difficult to read. Satin chrome finish. Incorporates quadri feature.

Series 505

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

UNC - Class 2B Tolerance

Micrometer Setting Standards

For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block.Manufactured to BS 870.

167 Series (Micrometer NOT included)