Kennedy® Screw Ring Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product for optimum wear life.

No Go

Metric Fine - Class Tolerance 6G

Kennedy® Screw Plug Gauges

Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and optimum wear life.

Single Ended Go

BSPF - Medium Class Tolerance

Anvils, Indentors & Test Blocks

To suit Oxford hardness tester.

Test Blocks

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Rockwell Hardness Tester, Model 150R

For testing the Rockwell hardness of hard alloys, quenched and unquenched steels, using steel ball or diamond penetrators to measure Rockwell A, B & C units of measurement. Manufactured in accordance with BS 891 : 1962 & IS 3804 : 1966.
Technical data: Preliminary test force: 98.07N(10kgf).

Measuring Ranges:
20-88HRA (Test force: 588.4N/60kgf)
20-100HRB (Test force: 980.7N/100kgf),
20-70HRC (Test force: 1471N/150kgf).

Max Height of Test Piece:
80mm with screw protective jacket,
170mm without.

Depth of throat: 135mm.
Dimensions: 466 x 238 x 630mm
Weight: 65kg

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Grade 1-For inspection use

Manufactured to BS EN ISO 3650. Available in two grades.

Digital Indicators

Series 543 - Type IDC
Displays spindle movement digitally by means of a linear encoder.
Dial rotates through 330 for easy reading.
Inch/metric conversion.
Self-contained power supply.
Pre-set and zero-setting (ABS/INC).
Data output and direction changeover facilities.

Range: 0 - 12.7mm/0 - 0.5".
Accuracy: 0.003mm /0.00012".
Resolution: 0.001mm/0.00005".

Series 543 - Type IDC

Professional Inspection Loupes

For inspecting material surfaces and fine markings.
Clear transparent base allows ambient light to
illuminate the material clearly.

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble