Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 12.5mm capacity. METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.) Accuracy: Units between 2-50mm: 0.004mm. Units between 50-200mm: 0.005mm. Units between 200-300mm: 0.007mm.

Individual units

Supplied with: Digital pistol grip, head and setting ring.

Bowers Metrology CV Digital Push-Pull Force Gauges

For the measurement of push-pull forces. Suitable for use in material testing, manufacturing assembly, automotive, electric and various other industries. Available in 8 models.

SH-10 (Max Newtons: 10, Min Newtons: 0.005)

Features:
Accuracy plus/minus 0.5% of full scale.
Peak hold function.
Tolerance setting.
Calculation of average values.
Lbf, Kgf and Newton units.
RS232 digital output
Supplied with standard accessories.
Stand available as an option (BOW3081650A)

2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).

Bowers Metrology CV Rockwell Analogue Hardness Testers

Basic regular Rockwell bench tester range offering accuracy, reliability and durability at an extremely affordable price. Tests to all regular Rockwell scales.

W-600MA Rockwell Hardness Tester with Analogue Display - Motorised

Features:
Direct analogue display of HRC, B, A, F.
Rugged construction, will withstand toughest environments.
Includes range of test anvils, indenters and test blocks.
Accuracy conforms to EN-ISO 6508 (also ASTM-E18 CV-600A).
Large capacity to accommodate large test specimen.

Specifications:
Rockwell scales: A, B, C, D.
Hardness resolution: 0.5 of a Rockwell unit.
Test loads: 60, 100, 150kgf (10kgf preload).
Display: Dial indicator.
Test cycle: Motorised.
Dwell time: 0-30 sec (5 sec. step).
Data output: No
Specimen accommodation: Vertical space 160mm, horizontal space from centreline 160mm.
Specimen access: External surfaces, cylindrical surfaces down to 3mm.
Power supply: 220V 50Hz.
Machine dimensions: (W)150mm x (D)485mm x (H)700mm.
Weight: 85kg.

Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 12.5mm capacity. METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.) Accuracy: Units between 2-50mm: 0.004mm. Units between 50-200mm: 0.005mm. Units between 200-300mm: 0.007mm.

Individual units

Supplied with: Digital pistol grip, head and setting ring.

Sylvac S_Mike Pro Digital Micrometer

Complies with: DIN 863
Features:
• Automatic wake-up by moving the measuring spindle
• Sleep mode after 20 min. of no use
• Position memorised in sleep mode
• Water protected for heavy-duty work with coolants and
lubricants, protection rating IP67 according to IEC60529,
with or without connector
• Measuring range 0 - 102mm covered with 3 instruments only
• Set of 3 micrometers 0 - 102 mm available
• Quick displacement of the measuring spindle 12mm / rotation
• Adjustable measuring force 5N / 10N
• Battery life 12,000 hours
• Non-rotating spindle
• Preset function
• Setting masters provided where applicable**

2/3 Point Micrometers - Digital

Range of metric/imperial digital internal micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Models measuring 12.5mm and above are supplied with carbide and blind bore measuring anvils. Units below 6mm capacity are 2 point all other units are 3 point. Features include:Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.)Accuracy: Units between 1-20mm: 0.003mm. Units between 20-100mm: 0.004mm. Units between 100-200mm: 0.005mm. Units between 200-300mm: 0.006mm.

Individual units

Supplied with: Digital display unit, head and setting ring.

Bowers Metrology CV Digital Push-Pull Force Gauges

For the measurement of push-pull forces. Suitable for use in material testing, manufacturing assembly, automotive, electric and various other industries. Available in 8 models.

SH-5 (Max Newtons: 5, Min Newtons: 0.01)

Features:
Accuracy plus/minus 0.5% of full scale.
Peak hold function.
Tolerance setting.
Calculation of average values.
Lbf, Kgf and Newton units.
RS232 digital output
Supplied with standard accessories.
Stand available as an option (BOW3081650A)

Bowers Metrology Sylvac Digital Indicator



30-805-5501 Sylvac 25mm Digital Indicator Indicator

Integrated, ergonomic lifting device (can be removed).
Large LCD digital readout. Direct metric/inch conversion. Programmable functions by PC.
Dual Output – Proximity /Powered opto.
Resolution: 0.001mm/0.0005”.

2/3 Point Micrometers - Digital

Range of metric/imperial digital internal micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Models measuring 12.5mm and above are supplied with carbide and blind bore measuring anvils. Units below 6mm capacity are 2 point all other units are 3 point. Features include:Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.)Accuracy: Units between 1-20mm: 0.003mm. Units between 20-100mm: 0.004mm. Units between 100-200mm: 0.005mm. Units between 200-300mm: 0.006mm.

Individual units

Supplied with: Digital display unit, head and setting ring.