Bowers Metrology CV Digital Push-Pull Force Gauges

For the measurement of push-pull forces. Suitable for use in material testing, manufacturing assembly, automotive, electric and various other industries. Available in 8 models.

SH-20 (Max Newtons: 20, Min Newtons: 0.01)

Features:
Accuracy plus/minus 0.5% of full scale.
Peak hold function.
Tolerance setting.
Calculation of average values.
Lbf, Kgf and Newton units.
RS232 digital output
Supplied with standard accessories.
Stand available as an option (BOW3081650A)

2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).

Sylvac S_Mike Pro Digital Micrometer

Complies with: DIN 863
Features:
• Automatic wake-up by moving the measuring spindle
• Sleep mode after 20 min. of no use
• Position memorised in sleep mode
• Water protected for heavy-duty work with coolants and
lubricants, protection rating IP67 according to IEC60529,
with or without connector
• Measuring range 0 - 102mm covered with 3 instruments only
• Set of 3 micrometers 0 - 102 mm available
• Quick displacement of the measuring spindle 12mm / rotation
• Adjustable measuring force 5N / 10N
• Battery life 12,000 hours
• Non-rotating spindle
• Preset function
• Setting masters provided where applicable**

2/3 Point Micrometers - Digital

Range of metric/imperial digital internal micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Models measuring 12.5mm and above are supplied with carbide and blind bore measuring anvils. Units below 6mm capacity are 2 point all other units are 3 point. Features Include: Direct RS232 data output. Preset facility for inputting ring size. True metric/imperial conversion. Resolution of 0.001mm/0.00005". Setting rings come complete with UKAS calibration certificate.Accuracy: Units between 1-20mm:\t0.003mm. Units between 20-100mm:\t0.004mm. Units between 100-200mm:\t0.005mm. Units between 200-300mm:\t0.006mm.

Complete sets

Supplied with: Digital display unit, head and setting rings.

Bowers Metrology CV Rockwell Analogue Hardness Testers

Basic regular Rockwell bench tester range offering accuracy, reliability and durability at an extremely affordable price. Tests to all regular Rockwell scales.

W-600A Rockwell Hardness Tester with Analogue Display - Manual

Features:
Direct analogue display of HRC, B, A, F.
Rugged construction, will withstand toughest environments.
Includes range of test anvils, indenters and test blocks.
Accuracy conforms to EN-ISO 6508 (also ASTM-E18 CV-600A).
Large capacity to accommodate large test specimen.

Specifications:
Rockwell scales: A, B, C, D.
Hardness resolution: 0.5 of a Rockwell unit.
Test loads: 60, 100, 150kgf (10kgf preload).
Display: Dial indicator.
Test cycle: Manual.
Dwell time: Manually controlled.
Data output: No
Specimen accommodation: Vertical space 160mm, horizontal space from centreline 160mm.
Specimen access: External surfaces, cylindrical surfaces down to 3mm.
Machine dimensions: (W)150mm x (D)485mm x (H)700mm.
Weight: 85kg.

Portable Hardness Tester - Webster Type

The WEBSTER Hardness Testers are portable instruments that can perform on-site hardness testing on aluminium alloys, brass, copper and soft steel. A quick and easy test, the hardness value can be read out directly from the indicator with a simple clamp. Suitable for testing aluminium alloy profiles, tubings and sheet materials. Especially suitable for fast, non destructive quality inspection on the production site.

Features
• One hand operation and portability
• Variety of anvils permits testing a great variance of shapes
• Simple operation permits readings independent of the operator’s skill
• Test is made by simply applying pressure to the handles until" bottom" is felt
• Easy-to-read dial indicator with 20 graduations permits use of the tester as "go" and "no-go" gauge
• Standard hardness gauge tests materials up to 13mm in thickness



Material: Aluminium Alloy
Hardness range: 25-110HRE/58-131HV
Workpiece: Thickness: 6mm Max. Diameter: 10mm Min.
Measuring scope:0-20HW
Accuracy: 0.5HW
Weight: 0.5kg

Bowers Trimos V Series Digital Height Gauge
Perfect for use in the workshop environment, the easy-to-operate Trimos V Series Height Gauge offers accuracy and repeatability alongside quick performance.

Features:
• Extremely easy to operate
• Autonomous use with rechargeable battery pack
• Clear definition of all measuring functions
• Extremely large display values
• Acceptance of a measured value by acoustic signal
• Direct RS232C data output (bi-directional)
• Supplied with setting master

20-VL300 Trimos V Series Digital Height Gauge

Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 12.5mm capacity. METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.) Accuracy: Units between 2-50mm: 0.004mm. Units between 50-200mm: 0.005mm. Units between 200-300mm: 0.007mm.

Individual units

Supplied with: Digital pistol grip, head and setting ring.

Bowers Metrology CV Ultrasonic Thickness Gauge (Universal)

The W-TT300 hand-held ultrasonic thickness gauge with transducer, for metals, glass and plastics.

Features:
0.1mm reading, standard 5MHz transducer included.
Display resolution menu selectable.
Automatic zero setting.
Two-point calibration possible.
LCD display with back-light.
Min. mode for minimum thickness measurement.
MM/inch selectable.
Data output RS-232.
Large internal memory for 500 readings.
Surface temperature: minus 10C to plus 60C.
Sound velocity range: 1000-9000m/s.
Including protection case, couplant and carrying case.

Bowers Metrology CV Digital Pull-Push Force Gauge Stand

Test stands for Digital Push-Pull Force Gauge (illustrated with gauge attached, not included).



13-03652 Motorised Test Stand