Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 12.5mm capacity. METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.) Accuracy: Units between 2-50mm: 0.004mm. Units between 50-200mm: 0.005mm. Units between 200-300mm: 0.007mm.

Individual units

Supplied with: Digital pistol grip, head and setting ring.

3-Point Bore Micrometer Sets - Analogue

Economical range of mechanical two and three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring heads and setting rings are UKAS calibrated (6-200mm range only).

The new MicroGauge 2-point bore-gauging system has been designed specifically for the measurement of small bores between 1.0 - 6.0 mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time. The clear LCD display is easily set using only two buttons and results are shown with switchable 0.01/0.001/0.0005 mm resolution. Data transfer is via Proximity-RS232 or Proximity-USB output. The measuring heads are equipped with spherical hard-chromed contact points and are set in appropriate setting rings. Like all Bowers bore gauging products the MicroGauge system is available as individual instruments or as full sets. All setting rings are supplied as standard with UKAS certification.

MicroGauge 2-point Bore Gauge Set

Features:
• System range: 1-6mm
• New slimline digital display
• Switchable resolution 0.01/0.001/0.0005mm
• Simple 2-button operation
• Clear LCD display
• Data output : RS232 / USB proximity sensor
• Linearity : Diameter 1.0-1.5 max 2% of measuring travel,
min 0.001mm. Diameter 1.5-6 max 1% of measuring travel, min
0.001mm
• Repeatability : 0.001mm
• Available as individual instruments or sets
• UKAS-certificates as standard with all setting rings
• Hard-chromed ball-contacts
• Depth-stops available
• Stand available as an option

Holematic

Range of metric/imperial digital holematic micrometers with XT (extended travel) feature on models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Pistol grip handle gives a constant measuring pressure to eliminate operator "feel". Features include: Direct RS232C data output. Preset facility for inputting ring size. True Metric/Imperial conversion. Resolution of 0.001mm/0.00005". Rotating display for ease of reading. Carbide anvils supplied with all units above 12.5mm capacity. METRIC setting ring supplied as standard complete with UKAS calibration certificate. (Micrometers with IMPERIAL setting rings are available on request.) Accuracy: Units between 2-50mm: 0.004mm. Units between 50-200mm: 0.005mm. Units between 200-300mm: 0.007mm.

Individual units

Supplied with: Digital pistol grip, head and setting ring.

The new MicroGauge 2-point bore-gauging system has been designed specifically for the measurement of small bores between 1.0 - 6.0 mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time. The clear LCD display is easily set using only two buttons and results are shown with switchable 0.01/0.001/0.0005 mm resolution. Data transfer is via Proximity-RS232 or Proximity-USB output. The measuring heads are equipped with spherical hard-chromed contact points and are set in appropriate setting rings. Like all Bowers bore gauging products the MicroGauge system is available as individual instruments or as full sets. All setting rings are supplied as standard with UKAS certification.

MicroGauge 2-point Bore Gauge Set

Features:
• System range: 1-6mm
• New slimline digital display
• Switchable resolution 0.01/0.001/0.0005mm
• Simple 2-button operation
• Clear LCD display
• Data output : RS232 / USB proximity sensor
• Linearity : Diameter 1.0-1.5 max 2% of measuring travel,
min 0.001mm. Diameter 1.5-6 max 1% of measuring travel, min
0.001mm
• Repeatability : 0.001mm
• Available as individual instruments or sets
• UKAS-certificates as standard with all setting rings
• Hard-chromed ball-contacts
• Depth-stops available
• Stand available as an option

Bowers Metrology CV Digital Pull-Push Force Gauge Stand

Test stands for Digital Push-Pull Force Gauge (illustrated with gauge attached, not included).



13-03652 Motorised Test Stand

2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).

Sylvac S_Mike Pro Digital Micrometer

Complies with: DIN 863
Features:
• Automatic wake-up by moving the measuring spindle
• Sleep mode after 20 min. of no use
• Position memorised in sleep mode
• Water protected for heavy-duty work with coolants and
lubricants, protection rating IP67 according to IEC60529,
with or without connector
• Measuring range 0 - 102mm covered with 3 instruments only
• Set of 3 micrometers 0 - 102 mm available
• Quick displacement of the measuring spindle 12mm / rotation
• Adjustable measuring force 5N / 10N
• Battery life 12,000 hours
• Non-rotating spindle
• Preset function
• Setting masters provided where applicable**

Bowers Metrology CV Digital Push-Pull Force Gauges

For the measurement of push-pull forces. Suitable for use in material testing, manufacturing assembly, automotive, electric and various other industries. Available in 8 models.

SH-50 (Max Newtons: 50, Min Newtons: 0.01)

Features:
Accuracy plus/minus 0.5% of full scale.
Peak hold function.
Tolerance setting.
Calculation of average values.
Lbf, Kgf and Newton units.
RS232 digital output
Supplied with standard accessories.
Stand available as an option (BOW3081650A)

2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).