Overcord Z E6013 Rutile Electrode

Oerlikon Overcord Z is a new E6013 rutile MMA electrode, it is designed for all positional welding including vertical up and down (it replaces Supercord). Overcord Z is manufactured with a rutile/cellulosic flux coating, which gives a fast freezing slag to enable vertical down welding. Overcord Z offers easy striking with improved stable operating characteristics resulting in excellent weld bead shape and appearance.

Conforms to:
AWS A5.1-91 - E6013
EN499: 1994 E38 0 RC 11

Kennedy Welding Accessories

Kennedy PVC welding curtains comply with EN1598 to block out welding light. The curtains have snap-fasteners on both sides to allow several to be joined together to create the desired width.

Supplied with reinforced holes on the upper edge and steel suspension rings.

PVC Welding Curtains

All Kennedy PVC welding curtains are made of a pliable, self-extinguishing PVC material with a flash point of 320-390C.

Conform to: EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Supplied with steel curtain rings.

Available in a range of sizes and colours.

Aluminium Tig/Gas Welding Rods

Sifalumin No.15 - 5% Silicon
BS 2901 : Part 4 : 1990 4043A. (Tig rods). AWS A/SFA 5-10-88: ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys (not magnesium alloys). Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Lightweight Acetylene Welding Mixer

For use with lightweight shanks and welding nozzles.

Spare for Speedglas 100 Auto Welding Helmets

Inside protection plate

Binzel MIG Torch Accessories

Also compatible with Parweld Torches.

Liners

PVC coated for use with steel wire. Colour coded to indicate wire size: 0.6 - 0.9mm Blue, 1.0 - 1.2mm Red.

Smarty TX160Alu

Heavy-duty single-phase inverter AC/DC T.I.G. / M.M.A. machine, for general-purpose use. Features include robust ABS plastic case to protect from accidental damage, T.I.G. pulsing on DC, wave balance and frequency control on AC, H.F. start, slope out, 2/4 latching, remote facility, hot start and Anti stick device. Simple controls for welding cycle control for post gas, down slop and post gas. Ideal for production, maintenance and on site fabrication.
Input Voltage: 240 volt 16amp
Welding Current Range: 5-150amps
Duty Cycle: 120amps @ 60%
Supplied with: TIG Torch, Earth lead, and Regulator
Optional Foot Pedal Available

Spare flints (1 head) for Kennedy Triple Flint Type Spark Lighter (1284)

When one flint wears, turn the triangular head to use the next flint.

Puma Power 2000



2000

A heavy duty single phase inverter MMA/scratch start machine
with protection for use with power generators
Welding current range: 5 - 180amps.
Duty cycle @ 60% 140amps.
Weldable electrodes 1.6 - 4.0mm.
Dimensions (L x W x H): 162 x 265 x 385mm.
Weight: 9kg.

Accessories for TL Multiview Helmet

Suitable for Murex TL Multiview Helmet (CTL-885-4598D).